Canon 2010F manual Feeder ADF-J1

Page 23

1

Introduction to Copying

Feeder (ADF-J1)

Place a stack of originals in the feeder, and press [Start]. The machine automatically scans them into memory.

You can place the following originals in the original supply tray:

•Weight: 10 to 32 lb bond (37 to 128 g/m2)

Place very thin originals 10 to 14 lb bond (37 to 51 g/m2), or very thick originals 28 to 32 lb bond (105 to 128 g/m2) into the feeder one at a time.

•Size: 11'' ✕ 17'' , LGL , LTR , LTR , or STMT .

•Tray Capacity: 50 sheets (20 lb bond [80 g/m2])

25 sheets (11 lb bond [40 g/m2] or less)

IMPORTANT

•Do not place the following types of originals in the feeder:

-Originals with tears or large binding holes

-Severely curled originals or originals with sharp folds

-Clipped or stapled originals

-Carbon backed paper or other originals which might not feed smoothly

-Transparencies and other highly transparent originals

•Avoid scanning the same original using the feeder more than approximately 30 times. Scanning the same original repeatedly may result in the original becoming folded or torn, which in turn could cause a paper jam.

•If the feeder rollers are dirty from scanning an original written in pencil, perform the feeder cleaning procedure. (See Chapter 7, “Routine Maintenance,” in the Reference Guide.)

1 Neatly place your originals face up in the original supply tray.

If you are enlarging LTR originals to 11'' x 17'' or LGL paper, place your originals horizontally.

Place your originals as far into the feeder as they will go.

Cou
Checknter
Display
Contrast
Collate
Special
Features	COPY
	COPY
	FAX

A beep sounds when the originals are set correctly.

1-14Placing Originals

Image 23

Contents Copying Guide ImageRUNNER 2010F Copying Guide Manuals for the Machine Appendix How This Manual Is OrganizedContents Appendix Special Copying FeaturesCustomizing Settings Keys Used in This Manual How to Use This ManualSymbols Used in This Manual Vii Illustrations Used in This ManualDisclaimers Legal NoticesTrademarks CopyrightIntroduction to Copying Overview of the imageRUNNER 2010F Copy Basic Features ScreenSpecial Features Screen Additional Functions Menu Press Copy Flow of Copy OperationsIf the message Insert a Control Card appears If the message Enter Department ID and Password appearsPlace your original Set the desired copy mode on the Copy Basic Features screenPress Start Set the desired copy modes on the Special Features screenEnter the copy quantity If you want to interrupt a copy job If you want to cancel a copy job in the standby modeIf you want to stop a copy job If you have set Department ID Management, press ID Feeder Placing OriginalsPlaten Glass Platen Glass Vertical Placement Horizontal Placement FeederVertical Placement OrientationPlace your original face down Platen GlassLift up the feeder Gently lower the feeder Feeder ADF-J1 Original Output Tray Adjust the slide guides to ﬁt the size of your originalsIf only one copy job is being processed Canceling a Copy JobUsing the Stop Key Press StopPress F3 YES Using the System Monitor ScreenYou cannot select multiple jobs and cancel them all at once Press MonitorCopy lights Reserved CopyingReserving Copy Jobs While Printing Place your original, and set the desired copy modesWhen scanning is complete, remove the original from Machine Press Interrupt Interrupt ModeOnce the original is scanned, remove it from the machine 22Interrupt Mode Basic Copying Features Changing the Copy Quantity Copy QuantitySpecifying the Required Number of Copies Copy Quantity Automatic Paper Selection Paper SelectionMake sure that Auto Paper is selected press OK Manual Paper SelectionIf you want to use the stack bypass Press F3 or F4 to select the desired paper sizePress OK Copy Exposure and Image Quality Automatic Text Mode Text/Photo ModeCopy Exposure Manual Image Quality ManualPress Light or Press F1 Light or F3 Dark to adjust the exposureCopy Exposure Manual Image Quality Manual Text ModeText/Photo Mode Photo ModeCopy Exposure and Image Quality Automatic Press F2 Auto Exposur OK To cancel the automatic exposure control, pressAuto Zoom Preset ZoomChanging the Copy Zoom Ratio Zoom by PercentageEnlarge Preset ZoomReduce Each time you press Press F3 Reduce or F4 Enlarge to select a presetZoom by Percentage Reduction or enlargement ratio press OKCorrect value Set the copy ratio using the numeric keys press OK200%. Enter a value within the setting range Auto ZoomPress F2 Auto Zoom OK Press F1 Copy RatioOptional Units Collate Rotate Offset Staple*1 Collating CopiesOriginals Set Result If the Collate Mode Is SetIf the Rotate Mode Is Set Place your originals press Collate If the Offset Mode Is SetIf the Staple Mode Is Set Order CollateIf you want to set the Offset mode If you want to set the Rotate modeNumber of Copies, on p Order StapleAppears LightsPress Start 24Collating Copies Special Copying Features Place your original on the platen glass press Special FeaturesTwo-Page Separation Special Original Size setting menu appearsDirection that the book opens press OK Press F4 Orignal Size to select the paper size press OK Top Margin Bottom Margin Selected Selected Margin ModePlace your original press Special Features Original Left Margin Selected Right Margin6Margin Mode Press YES or Original Frame Erase Frame EraseHole Punch Erase Book Frame Erase Mode Original Selected Copy Not SelectedOriginal Frame Erase Book Frame ErasePress F4 Orignal Size to select the size of the original Book Frame Erase Opened press OK Press F3 Frame Erase Press F3 Book FR ERS OKClear to clear the value Default setting is ‘10 mm’Press F3 or F4 + to set the desired book frame erase Width 3 mm to 50 mm for the center line press OKPress F3 Frame Erase Press F4 HOLE/P Erase OK Hole Punch EraseEach time you press 16Frame Erase Image Combination Original Vertical Placement CopyCopying Special Place your originals press Special FeaturesBecomes highlighted Copy Layout setting menu appears If you selected 4 on 1 in step Paper size press OKIf you selected 2 on 1 Comb in step Press Start Place your originals in the feeder press the Shortcut key To 4 where you registered the Different Size OriginalsDifferent Size Originals ModeSet the desired copy modes 24Different Size Originals Customizing Settings Available Settings Applicable Copy Settings TablePress Additional Functions Changing the Current Standard SettingsImage Quality and Copy Exposure EXP press OK Press Reset to return to the Copy Basic Features screenPress F3 or F4 to highlight 01 STD Image Qual Press F3 or F4 to highlight 02 STD Zoom Ratio Press OK Zoom RatioPress F3 or F4 to highlight 03 Standard Copy QTY press OK Copy QuantityWidth press OK Frame Erase WidthPress F3 or F4 to highlight 04 Frame Erase Mm to 20 mm press OK Auto SortPress F2 or F3 + to set the desired frame erase width Press F3 or F4 to select 01 on or 02 OFF Press OK Sort RotatePress F3 or F4 to highlight 05 Auto Sort Press OK Press F3 or F4 to highlight 06 Sort Rotate press OK Original Copy Dull Is Set Dull Is Not Set SharpnessDull SharpPress F3 or F4 to highlight 08 Sharpness press OK If you want to use the prescan function, select 01 on PrescanPress F3 or F4 to highlight 09 Prescan press F4OK 14Changing the Current Standard Settings Assigning Functions Using Shortcut KeysPress F3 or F4 to select a shortcut key press OK Press F3 or F4 to highlight 07 Shortcut KEY SET press OKMaking Copies That contains the copy mode you want to setIf necessary, specify the settings for each mode Setting Applicable18Using Shortcut Keys Appendix Function to Be Set Combination of Functions ChartCombination available Combination unavailable 4Combination of Functions Chart Originals Size Different Numerics IndexIndex Making Copies Canon Italia S.p.A Canon Deutschland GmbH

Related manuals

Manual 382 pages 14.98 Kb