Belkin F1DP116G, F1DP108G user manual Local Installation, Mounting the Switch

Local Installation

Step 1 Mounting the Switch

Note: Before you begin, locate the MAC address and device number on the back of the Switch. You will need these numbers later in the installation process, so it is highly recommended that you record these numbers below before mounting the Switch to your rack.

MAC Address Device Number

The Switch includes adjustable mounting brackets ideal for installation in

19-inch racks. The mounting brackets feature three adjustment positions that allow you to set the Switch’s face flush with the ends of the rails, or to extend the Switch past the front of the rails. Please follow these simple steps to achieve the desired adjustment.

1.1Determine how far you would like the Switch to protrude from the rack. Select a bracket-hole scheme.

1.2Attach the bracket to the side of the Switch using the Phillips screws provided. (Refer to diagram below.)

1.3.Mount the Switch to the rack rails. (Refer to diagram below.)

Your Switch is now mounted securely to the rack and you are ready to connect your console.

1

2

3

4

5

6

7

8

9

10

section

13