Belkin F1DP116G, F1DP108G user manual Down

Using the Switch from a Local Console

With a daisy-chain switch configuration, you can switch between BANKs (KVM switches) by pressing “Scroll Lock”, “Scroll Lock”, “Page Up”, to switch to the previous BANK. Press “Scroll Lock”, “Scroll Lock”, “Page Down”, to switch to the next BANK.

Page	Page
Up	Down

With a daisy-chain switch configuration, you can switch directly to any port on any BANK by pressing “Scroll Lock”, “Scroll Lock”, BANK address, and the port number. For example, if you press “Scroll Lock”, “Scroll Lock”, “03”, “05”, the server on BANK 03, port 5 will become active.

Note: You will have approximately five seconds to complete each hot-key sequence.

See page 65 for instructions on how to change the hot-key-initiator key.

1

2

3

4

5

6

7

8

9

10

section

59