Remote Installation
Restore Factory Settings
You can restore the Switch to its original factory settings. This restores the original parameters, resetting all the information added by the administrators, including: network settings, servers, switches, users, and passwords. You also have the option to preserve network settings, as explained below.
WARNING! Once data has been reset, it cannot be retrieved.
To restore factory settings:
1.Select “Restore Factory Settings” in the
2.Check the
3.Click .
Fig. 9 Restore-Factory-Settings Page
Logging Out
To exit the Configuration page and close the session, click .
Only one administrator can log into the Configuration area at a time. An idle timeout of 30 minutes terminates the session.
42