Belkin F1DP116G, F1DP108G user manual Maintenance, Firmware Upgrade To upgrade firmware

Page 45

Remote Installation

Maintenance

Firmware Upgrade

You can upgrade the Switch’s firmware to take advantage of new features or fixes as they become available. Visit www.belkin.com/support to check for firmware updates.

To upgrade firmware:

1.Download and save the firmware file on the client computer.

2.Select “Firmware Upgrade” under “Maintenance” in the far-left menu of the web interface. The Firmware-Upgrade page will appear (see Fig. 8).

3.Click to locate and install the firmware file.

4.Click “Start Upgrade”.

5.Once the upgrade is complete, click “Reboot”. The unit should reboot. After about 30 seconds, the Login page should appear.

Fig. 8 Firmware-Upgrade Page

Note: Depending on the type of firmware upgrade, the following settings

may be erased: user settings, switch-configuration settings, mouse and video adjustments, and RS232 serial-device settings. For more information, refer to the firmware release notes. The network settings will remain intact.

1

2

3

4

5

6

7

8

9

10

section

41

Image 45

Contents OmniView SMB KVM-over-IP Switch Page Table of Contents Using the Switch from a Local Console Using the Switch from a Remote ConsoleIntroduction Package ContentsOverview Remote-Management FeaturesOther Features Server Interface Modules Equipment RequirementsOmniView SMB Server Interface ModulesBelkin UTP Patch Cables CablesSystem Requirements Unit Display Diagrams Front ViewBack View Specifications SMB Server Interface Module, PS/2 SMB Server Interface Module, Legacy Sun SMB Server Interface Module, USBVGA-Cable Length USB-Cable Length VGA-Cable Length MiniDIN8-Cable LengthLocal Installation Pre-ConfigurationWhere to place the Switch Cable-Distance Requirements for PS/2, USB, and Sun Servers Mounting the Switch Local InstallationConnecting the Console to the Switch Local Installation Connecting Servers to the Switch PS/2 Connection Local Installation Connecting Servers to the Switch USB Connection Local Installation Connecting Servers to the Switch Sun MiniDIN8 Connection Local Installation Powering Up the Systems How to Assign a Bank Address Daisy-Chaining Multiple KVM Switches OptionalDIP SWITCH# SMB CAT5 Bank Address BANK-DIP-Switch-Configuration Chart SMB CAT5 KVM SwitchesExample of Daisy-Chain Configuration Getting Started Connecting the Primary and Secondary KVM SwitchesConnecting the servers Identifying the IP Address Remote InstallationTo log into the web interface Logging into the Web InterfaceRemote Installation Network Configuration Device NameFirst TCP Port Set a Static IP Enable DhcpUser Settings AdministratorUser To add a new user View OnlyTo delete a user To edit a userBlocking a standard user and View Only user To block a userSwitch-Configuration Switch ConfigurationInstalling new Switch-Definition Files SDFs To install the SDFTo specify and name servers To configure your serial device Serial SettingsSecurity Settings Password PolicyAccount Blocking Idle Timeout To install an SSL certificateSSL Certificate Firmware Upgrade To upgrade firmware MaintenanceRestore Factory Settings To restore factory settingsLogging Out Using the Switch from a Remote Console Starting a Remote SessionTo start a remote session To work in full-screen mode Full-Screen ModeUsing the Quick-Access Toolbar Moving or Hiding the Quick-Access ToolbarDisconnecting the Remote Session Mouse-Pointer Alignment Mouse Configuration and SettingsTo align mouse pointers Mouse-Pointer CalibrationManual Settings You must manually synchronize the mouse pointers ifTo manually synchronize mouse pointers Mouse-Pointer Options Windows XP USB OptionAdvanced-Mouse Emulation To change the mouse-emulation settingsKeyboard Configuration and Settings To transmit a keyboard sequenceTo add a keyboard sequence Add-Special-Key Box To record a keyboard sequenceManual Video Adjust Video Configuration and SettingsTo refresh the video settings To adjust the video manuallyTo adjust the video automatically Auto Video AdjustTo change the bandwidth settings Performance Settings BandwidthTo connect to a different server Selecting a ServerAdditional Features To restore factory defaults Restoring Factory DefaultsUsing the Switch from a Local Console Selecting a Server or Bank Using Hot KeysSelecting a Server or Bank Down Selecting a Bank Using Scroll Buttons Selecting a Server Using Port SelectorsAutoScan Mode Main OSD-Menu On-Screen Display OSDFunction/Help OSD-Menu Keyboard CommandsAdmin Password Function/Help-Page Keyboard CommandsScan Scan TimeTimeout Monitor-DDC2 FeatureHot Key Hot-Key-Command Shortcuts Sun Key Combo Key Sun Combo KeysUpdating Firmware Can I use the Switch on my Sun server that supports USB? Frequently Asked QuestionsFrequently Asked Questions Solution ProblemLocal Console GeneralMouse KeyboardUSB Remote Console Video quality is bad and/or grainy Glossary Section FCC Statement Belkin Corporation Limited 2-Year Product WarrantyInformation How to get serviceBelkin Tech Support

Related manuals

Manual 84 pages 11.57 Kb