Belkin F1DP108G, F1DP116G Performance Settings Bandwidth, To change the bandwidth settings

Page 58

Using the Switch from a Remote Console

Performance Settings (Bandwidth)

You can adjust the bandwidth settings on the Switch to give you the desired compression and color-support levels for your remote sessions.

To change the bandwidth settings:

1.In the quick-access toolbar, click on . The Performance-Settings box will appear (see Fig. 19).

Fig. 19 Performance-Settings Box

2.Select one of the following bandwidth options:

Adaptive—Automatically adapts to the best compression and colors based on activity.

Low—Provides high compression and 16-color support.

Medium—Provides medium compression and 256-color support. Medium is recommended when accessing the Switch over an Internet connection.

High—Provides low compression and high, 16-bit color support. This setting provides optimal performance when working on a LAN.

Custom—Allows you to select your own compression and color-support levels. Choose between Low, Medium, and High compression, and 16-, 256-, and High (16-bit) color support.

3.When finished, click “OK” to save the setting. The screen of the last accessed target server will appear.

54

Image 58
Contents OmniView SMB KVM-over-IP Switch Page Table of Contents Using the Switch from a Remote Console Using the Switch from a Local ConsolePackage Contents IntroductionRemote-Management Features OverviewOther Features OmniView SMB Server Equipment RequirementsServer Interface Modules Interface ModulesCables Belkin UTP Patch CablesSystem Requirements Front View Unit Display DiagramsBack View Specifications SMB Server Interface Module, PS/2 VGA-Cable Length USB-Cable Length SMB Server Interface Module, USBSMB Server Interface Module, Legacy Sun VGA-Cable Length MiniDIN8-Cable LengthPre-Configuration Local InstallationWhere to place the Switch Cable-Distance Requirements for PS/2, USB, and Sun Servers Local Installation Mounting the SwitchConnecting the Console to the Switch Local Installation Connecting Servers to the Switch PS/2 Connection Local Installation Connecting Servers to the Switch USB Connection Local Installation Connecting Servers to the Switch Sun MiniDIN8 Connection Local Installation Powering Up the Systems Daisy-Chaining Multiple KVM Switches Optional How to Assign a Bank AddressBANK-DIP-Switch-Configuration Chart SMB CAT5 KVM Switches DIP SWITCH# SMB CAT5 Bank AddressExample of Daisy-Chain Configuration Connecting the Primary and Secondary KVM Switches Getting StartedConnecting the servers Remote Installation Identifying the IP AddressLogging into the Web Interface To log into the web interfaceRemote Installation Device Name Network ConfigurationFirst TCP Port Enable Dhcp Set a Static IPAdministrator User SettingsUser View Only To add a new userBlocking a standard user and View Only user To edit a userTo delete a user To block a userSwitch Configuration Switch-ConfigurationTo install the SDF Installing new Switch-Definition Files SDFsTo specify and name servers Serial Settings To configure your serial devicePassword Policy Security SettingsAccount Blocking To install an SSL certificate Idle TimeoutSSL Certificate Maintenance Firmware Upgrade To upgrade firmwareTo restore factory settings Restore Factory SettingsLogging Out Starting a Remote Session Using the Switch from a Remote ConsoleTo start a remote session Full-Screen Mode To work in full-screen modeMoving or Hiding the Quick-Access Toolbar Using the Quick-Access ToolbarDisconnecting the Remote Session To align mouse pointers Mouse Configuration and SettingsMouse-Pointer Alignment Mouse-Pointer CalibrationYou must manually synchronize the mouse pointers if Manual SettingsTo manually synchronize mouse pointers USB Option Mouse-Pointer Options Windows XPTo change the mouse-emulation settings Advanced-Mouse EmulationTo transmit a keyboard sequence Keyboard Configuration and SettingsTo add a keyboard sequence To record a keyboard sequence Add-Special-Key BoxTo refresh the video settings Video Configuration and SettingsManual Video Adjust To adjust the video manuallyAuto Video Adjust To adjust the video automaticallyPerformance Settings Bandwidth To change the bandwidth settingsSelecting a Server To connect to a different serverAdditional Features Restoring Factory Defaults To restore factory defaultsSelecting a Server or Bank Using Hot Keys Using the Switch from a Local ConsoleSelecting a Server or Bank Down Selecting a Server Using Port Selectors Selecting a Bank Using Scroll ButtonsAutoScan Mode On-Screen Display OSD Main OSD-MenuOSD-Menu Keyboard Commands Function/HelpScan Function/Help-Page Keyboard CommandsAdmin Password Scan TimeMonitor-DDC2 Feature TimeoutHot Key Hot-Key-Command Shortcuts Sun Combo Keys Sun Key Combo KeyUpdating Firmware Frequently Asked Questions Can I use the Switch on my Sun server that supports USB?Frequently Asked Questions Local Console ProblemSolution GeneralKeyboard MouseUSB Remote Console Video quality is bad and/or grainy Glossary Section Belkin Corporation Limited 2-Year Product Warranty FCC StatementHow to get service InformationBelkin Tech Support
Related manuals
Manual 84 pages 11.57 Kb