Belkin F1DP108G, F1DP116G user manual Mouse Configuration and Settings, Mouse-Pointer Alignment

Page 50

Using the Switch from a Remote Console

Mouse Configuration and Settings

Mouse-Pointer Alignment

When working remotely at the client computer, two mouse pointers will appear: one for the client computer and one for the target server. The client computer’s mouse pointer will appear on top of the target server’s. The mouse pointers should be synchronized (aligned). If they are not synchronized, follow the instructions below.

To align mouse pointers:

1.In the quick-access toolbar, click .

2.Select “Align” or press “Ctrl+M”.

Mouse-Pointer Calibration

A target server may have a different mouse-pointer speed than the client computer. Calibration automatically discovers the mouse speed of the target server and aligns the two pointers. When you calibrate pointers, the Switch saves the alignment, so calibration is only needed once per target server.

To calibrate mouse pointers (for servers running on Windows NT or 2000):

1.In the quick-access toolbar, click .

2.Select “Calibrate”.

Note: If the video-noise level is above zero, calibration may not work properly. Go to “Video Adjustment” and try to eliminate the noise by pressing “Audio Video Adjust”, or by adjusting the bars in “Manual Video Adjust”, then perform the mouse calibration again.

46

Image 50
Contents OmniView SMB KVM-over-IP Switch Page Table of Contents Using the Switch from a Remote Console Using the Switch from a Local ConsolePackage Contents IntroductionRemote-Management Features OverviewOther Features OmniView SMB Server Equipment RequirementsServer Interface Modules Interface ModulesCables Belkin UTP Patch CablesSystem Requirements Back View Unit Display DiagramsFront View Specifications SMB Server Interface Module, PS/2 VGA-Cable Length USB-Cable Length SMB Server Interface Module, USBSMB Server Interface Module, Legacy Sun VGA-Cable Length MiniDIN8-Cable LengthWhere to place the Switch Local InstallationPre-Configuration Cable-Distance Requirements for PS/2, USB, and Sun Servers Local Installation Mounting the SwitchConnecting the Console to the Switch Local Installation Connecting Servers to the Switch PS/2 Connection Local Installation Connecting Servers to the Switch USB Connection Local Installation Connecting Servers to the Switch Sun MiniDIN8 Connection Local Installation Powering Up the Systems Daisy-Chaining Multiple KVM Switches Optional How to Assign a Bank AddressBANK-DIP-Switch-Configuration Chart SMB CAT5 KVM Switches DIP SWITCH# SMB CAT5 Bank AddressExample of Daisy-Chain Configuration Connecting the Primary and Secondary KVM Switches Getting StartedConnecting the servers Remote Installation Identifying the IP AddressLogging into the Web Interface To log into the web interfaceRemote Installation First TCP Port Network ConfigurationDevice Name Enable Dhcp Set a Static IPUser User SettingsAdministrator View Only To add a new userBlocking a standard user and View Only user To edit a userTo delete a user To block a userSwitch Configuration Switch-ConfigurationTo specify and name servers Installing new Switch-Definition Files SDFsTo install the SDF Serial Settings To configure your serial deviceAccount Blocking Security SettingsPassword Policy SSL Certificate Idle TimeoutTo install an SSL certificate Maintenance Firmware Upgrade To upgrade firmwareLogging Out Restore Factory SettingsTo restore factory settings To start a remote session Using the Switch from a Remote Console Starting a Remote Session Full-Screen Mode To work in full-screen modeDisconnecting the Remote Session Using the Quick-Access ToolbarMoving or Hiding the Quick-Access Toolbar To align mouse pointers Mouse Configuration and SettingsMouse-Pointer Alignment Mouse-Pointer CalibrationTo manually synchronize mouse pointers Manual SettingsYou must manually synchronize the mouse pointers if USB Option Mouse-Pointer Options Windows XPTo change the mouse-emulation settings Advanced-Mouse EmulationTo add a keyboard sequence Keyboard Configuration and SettingsTo transmit a keyboard sequence To record a keyboard sequence Add-Special-Key BoxTo refresh the video settings Video Configuration and SettingsManual Video Adjust To adjust the video manuallyAuto Video Adjust To adjust the video automaticallyPerformance Settings Bandwidth To change the bandwidth settingsSelecting a Server To connect to a different serverAdditional Features Restoring Factory Defaults To restore factory defaultsSelecting a Server or Bank Using the Switch from a Local ConsoleSelecting a Server or Bank Using Hot Keys Down Selecting a Server Using Port Selectors Selecting a Bank Using Scroll ButtonsAutoScan Mode On-Screen Display OSD Main OSD-MenuOSD-Menu Keyboard Commands Function/HelpScan Function/Help-Page Keyboard CommandsAdmin Password Scan TimeHot Key TimeoutMonitor-DDC2 Feature Hot-Key-Command Shortcuts Sun Combo Keys Sun Key Combo KeyUpdating Firmware Frequently Asked Questions Can I use the Switch on my Sun server that supports USB?Frequently Asked Questions Local Console ProblemSolution GeneralKeyboard MouseUSB Remote Console Video quality is bad and/or grainy Glossary Section Belkin Corporation Limited 2-Year Product Warranty FCC StatementHow to get service InformationBelkin Tech Support
Related manuals
Manual 84 pages 11.57 Kb