Belkin F1DP108G, F1DP116G user manual Hot-Key-Command Shortcuts

Using the Switch from a Local Console

Hot-Key-Command Shortcuts

Below is a complete list of hot-key commands that can be used for your Switch:

Command	Function
Scroll Lock, Scroll Lock, è	Switch to PREVIOUS ACTIVE port
Scroll Lock, Scroll Lock, ê	Switch to NEXT ACTIVE port
Scroll Lock, Scroll Lock,	Switch to PREVIOUS BANK (By default,
Page Up	selects first active port on the BANK)
Scroll Lock, Scroll Lock,	Switch to NEXT BANK (By default, selects first
Page Down	active port on the BANK)
Scroll Lock, Scroll Lock, Y	Directly switches to PORT Y on BANK 00
	(single-switch configuration) (Y=01 to 16)
Scroll Lock, Scroll Lock,	Directly switches to PORT Y on BANK X
	(daisy-chain configuration) (X=00 to 15),
Y, X
	(Y=01 to 16)
Scroll Lock, Scroll Lock,	Monitor DDC2 (identifies monitor settings)
Space Bar, F10
Scroll Lock, Scroll Lock,	Activate OSD
Space Bar
Scroll Lock, Scroll Lock, F4	Enable AutoScan mode (refer to AutoScan
	button)

Note: You will have approximately five seconds to complete each hot-key sequence.

66