Belkin F1DP116G, F1DP108G user manual Usb

Page 77

Troubleshooting

Problem:

When I switch from one port to another, mouse movement is completely erratic.

Solution:

Make sure you do not have more than one mouse driver installed. Make sure that the driver is either for a standard PS/2 mouse or a Microsoft server-compatible PS/2 mouse.

Make sure you do not have any mouse drivers loaded in your ConfigureSYS or AUTOEXEC.BAT files.

Avoid moving the mouse or pressing the mouse button when switching ports on the Switch.

Stop moving the mouse, wait for five seconds, and then move the mouse again. The Server Interface Module will synchronize the mouse movement automatically.

USB

Problem:

I am connecting the USB Server Interface Module to my USB server and my keyboard and mouse do not work.

Solution:

Prior to connecting the USB Server Interface Module, make sure that the HID USB driver is installed on each server. (To install the HID USB driver, connect a USB mouse and USB keyboard to the server. A Windows operating system should automatically install the drivers.)

1

2

3

4

5

6

7

8

9

10

section

73

Image 77
Contents OmniView SMB KVM-over-IP Switch Page Table of Contents Using the Switch from a Local Console Using the Switch from a Remote ConsoleIntroduction Package ContentsOverview Remote-Management FeaturesOther Features Server Interface Modules Equipment RequirementsOmniView SMB Server Interface ModulesBelkin UTP Patch Cables CablesSystem Requirements Back View Unit Display DiagramsFront View Specifications SMB Server Interface Module, PS/2 SMB Server Interface Module, Legacy Sun SMB Server Interface Module, USBVGA-Cable Length USB-Cable Length VGA-Cable Length MiniDIN8-Cable LengthWhere to place the Switch Local InstallationPre-Configuration Cable-Distance Requirements for PS/2, USB, and Sun Servers Mounting the Switch Local InstallationConnecting the Console to the Switch Local Installation Connecting Servers to the Switch PS/2 Connection Local Installation Connecting Servers to the Switch USB Connection Local Installation Connecting Servers to the Switch Sun MiniDIN8 Connection Local Installation Powering Up the Systems How to Assign a Bank Address Daisy-Chaining Multiple KVM Switches OptionalDIP SWITCH# SMB CAT5 Bank Address BANK-DIP-Switch-Configuration Chart SMB CAT5 KVM SwitchesExample of Daisy-Chain Configuration Getting Started Connecting the Primary and Secondary KVM SwitchesConnecting the servers Identifying the IP Address Remote InstallationTo log into the web interface Logging into the Web InterfaceRemote Installation First TCP Port Network ConfigurationDevice Name Set a Static IP Enable DhcpUser User SettingsAdministrator To add a new user View OnlyTo delete a user To edit a userBlocking a standard user and View Only user To block a userSwitch-Configuration Switch ConfigurationTo specify and name servers Installing new Switch-Definition Files SDFsTo install the SDF To configure your serial device Serial SettingsAccount Blocking Security SettingsPassword Policy SSL Certificate Idle TimeoutTo install an SSL certificate Firmware Upgrade To upgrade firmware MaintenanceLogging Out Restore Factory SettingsTo restore factory settings To start a remote session Using the Switch from a Remote ConsoleStarting a Remote Session To work in full-screen mode Full-Screen ModeDisconnecting the Remote Session Using the Quick-Access ToolbarMoving or Hiding the Quick-Access Toolbar Mouse-Pointer Alignment Mouse Configuration and SettingsTo align mouse pointers Mouse-Pointer CalibrationTo manually synchronize mouse pointers Manual SettingsYou must manually synchronize the mouse pointers if Mouse-Pointer Options Windows XP USB OptionAdvanced-Mouse Emulation To change the mouse-emulation settingsTo add a keyboard sequence Keyboard Configuration and SettingsTo transmit a keyboard sequence Add-Special-Key Box To record a keyboard sequenceManual Video Adjust Video Configuration and SettingsTo refresh the video settings To adjust the video manuallyTo adjust the video automatically Auto Video AdjustTo change the bandwidth settings Performance Settings BandwidthTo connect to a different server Selecting a ServerAdditional Features To restore factory defaults Restoring Factory DefaultsSelecting a Server or Bank Using the Switch from a Local ConsoleSelecting a Server or Bank Using Hot Keys Down Selecting a Bank Using Scroll Buttons Selecting a Server Using Port SelectorsAutoScan Mode Main OSD-Menu On-Screen Display OSDFunction/Help OSD-Menu Keyboard CommandsAdmin Password Function/Help-Page Keyboard CommandsScan Scan TimeHot Key TimeoutMonitor-DDC2 Feature Hot-Key-Command Shortcuts Sun Key Combo Key Sun Combo KeysUpdating Firmware Can I use the Switch on my Sun server that supports USB? Frequently Asked QuestionsFrequently Asked Questions Solution ProblemLocal Console GeneralMouse KeyboardUSB Remote Console Video quality is bad and/or grainy Glossary Section FCC Statement Belkin Corporation Limited 2-Year Product WarrantyInformation How to get serviceBelkin Tech Support
Related manuals
Manual 84 pages 11.57 Kb