Local Installation
3.4Connect the Switch to the Server Interface Module using the included Belkin CAT5e Patch Cable or other CAT5 cable. (Refer to diagram below.) Your server should recognize your Server Interface Module and automatically install the HID USB driver if necessary.
����� ��� | ������ |
������������������ | �������� |
3.5Repeat steps 3.1 through 3.4 for each additional USB server you wish to connect.
Note: We recommend you attach the Server Interface Module cable directly to a free USB port on your server with no USB devices in between.
1
2
3
4
5
6
7
8
9
10
section
19