Local Installation
Getting Started:
1.Make sure that all servers and Switches are powered off and that each KVM Switch has been assigned a unique BANK address.
2.Place the SMB KVM-over-IP Switch and all secondary KVM Switches in the desired location.
3.Connect the console monitor, keyboard, and mouse to the console ports of the SMB KVM-over-IP Switch. Refer to “Connecting the Console to the Switch” on page 14.
Connecting the Primary and Secondary KVM Switches:
1.Using the Daisy-Chain Cable (F1D108-CBL-XX), connect one end to the “Daisy-Chain” port on the SMB KVM-over-IP Switch.
2.Connect the other end of the Daisy-Chain Cable to the “Primary Input/ Secondary Output” port of the first secondary KVM Switch (BANK 01).
3.To add secondary units, connect one end of the Daisy-Chain Cable to the “Secondary Input” on the first secondary KVM Switch and the other end to the “Primary Input/Secondary Output” port of the next secondary KVM Switch (for example, BANK 01).
4.Repeat step 3 for additional KVM Switches you wish to add to your daisy-chain configuration.