Belkin F1DP116G, F1DP108G user manual Restoring Factory Defaults, To restore factory defaults

Page 61

Using the Switch from a Remote Console

Restoring Factory Defaults

The “Restore Factory Settings” section on page 42 explains how to restore factory settings from the web interface. When you cannot access the system (you have forgotten the user name, IP address, or password), you can restore factory defaults from the Switch.

To restore factory defaults:

1.Press and hold down the “Go-Local” button on the back of the Switch for five seconds while powering up the Switch. The Switch will boot up in safe mode.

2.Wait 30 seconds for the Switch to reboot.

3.Log in with the default IP address of the unit: http://192.168.2.155/config

The blank login screen will appear (no background picture).

Note: Do not start the IP address with https.

4.Type in the following default user name and password (case-sensitive), and click “Login”. This user name and password only work immediately after the reset procedure described above.

Safe-Mode User

Safe-Mode Password

 

 

admin

SAFEmode

 

 

5.From the menu, select “Restore Factory Settings”. A warning will appear advising you that all device data will be erased.

6.Click “Restore”. The factory defaults will be restored. When the process finishes, you will be prompted to reboot.

7.Click “Reboot” to restart the Switch.

1

2

3

4

5

6

7

8

9

10

section

57

Image 61
Contents OmniView SMB KVM-over-IP Switch Page Table of Contents Using the Switch from a Local Console Using the Switch from a Remote ConsoleIntroduction Package ContentsOverview Remote-Management FeaturesOther Features Server Interface Modules Equipment RequirementsOmniView SMB Server Interface ModulesBelkin UTP Patch Cables CablesSystem Requirements Front View Unit Display DiagramsBack View Specifications SMB Server Interface Module, PS/2 SMB Server Interface Module, Legacy Sun SMB Server Interface Module, USBVGA-Cable Length USB-Cable Length VGA-Cable Length MiniDIN8-Cable LengthPre-Configuration Local InstallationWhere to place the Switch Cable-Distance Requirements for PS/2, USB, and Sun Servers Mounting the Switch Local InstallationConnecting the Console to the Switch Local Installation Connecting Servers to the Switch PS/2 Connection Local Installation Connecting Servers to the Switch USB Connection Local Installation Connecting Servers to the Switch Sun MiniDIN8 Connection Local Installation Powering Up the Systems How to Assign a Bank Address Daisy-Chaining Multiple KVM Switches OptionalDIP SWITCH# SMB CAT5 Bank Address BANK-DIP-Switch-Configuration Chart SMB CAT5 KVM SwitchesExample of Daisy-Chain Configuration Getting Started Connecting the Primary and Secondary KVM SwitchesConnecting the servers Identifying the IP Address Remote InstallationTo log into the web interface Logging into the Web InterfaceRemote Installation Device Name Network ConfigurationFirst TCP Port Set a Static IP Enable DhcpAdministrator User SettingsUser To add a new user View OnlyTo delete a user To edit a userBlocking a standard user and View Only user To block a userSwitch-Configuration Switch ConfigurationTo install the SDF Installing new Switch-Definition Files SDFsTo specify and name servers To configure your serial device Serial SettingsPassword Policy Security SettingsAccount Blocking To install an SSL certificate Idle TimeoutSSL Certificate Firmware Upgrade To upgrade firmware MaintenanceTo restore factory settings Restore Factory SettingsLogging Out Starting a Remote Session Using the Switch from a Remote ConsoleTo start a remote session To work in full-screen mode Full-Screen ModeMoving or Hiding the Quick-Access Toolbar Using the Quick-Access ToolbarDisconnecting the Remote Session Mouse-Pointer Alignment Mouse Configuration and SettingsTo align mouse pointers Mouse-Pointer CalibrationYou must manually synchronize the mouse pointers if Manual SettingsTo manually synchronize mouse pointers Mouse-Pointer Options Windows XP USB OptionAdvanced-Mouse Emulation To change the mouse-emulation settingsTo transmit a keyboard sequence Keyboard Configuration and SettingsTo add a keyboard sequence Add-Special-Key Box To record a keyboard sequenceManual Video Adjust Video Configuration and SettingsTo refresh the video settings To adjust the video manuallyTo adjust the video automatically Auto Video AdjustTo change the bandwidth settings Performance Settings BandwidthTo connect to a different server Selecting a ServerAdditional Features To restore factory defaults Restoring Factory DefaultsSelecting a Server or Bank Using Hot Keys Using the Switch from a Local ConsoleSelecting a Server or Bank Down Selecting a Bank Using Scroll Buttons Selecting a Server Using Port SelectorsAutoScan Mode Main OSD-Menu On-Screen Display OSDFunction/Help OSD-Menu Keyboard CommandsAdmin Password Function/Help-Page Keyboard CommandsScan Scan TimeMonitor-DDC2 Feature TimeoutHot Key Hot-Key-Command Shortcuts Sun Key Combo Key Sun Combo KeysUpdating Firmware Can I use the Switch on my Sun server that supports USB? Frequently Asked QuestionsFrequently Asked Questions Solution ProblemLocal Console GeneralMouse KeyboardUSB Remote Console Video quality is bad and/or grainy Glossary Section FCC Statement Belkin Corporation Limited 2-Year Product WarrantyInformation How to get serviceBelkin Tech Support
Related manuals
Manual 84 pages 11.57 Kb