Belkin F1DP116G, F1DP108G user manual Network Configuration, Device Name, First TCP Port

Page 35

Remote Installation

Step 3 Network Configuration

When first connecting to the Switch’s HTTPS configuration page, two browser security warnings may appear. Click “Yes” on both warnings.

Note: The first security warning only occurs once per client machine. This is when the Belkin root certificate is installed. The second warning can be avoided

by adding a line to your Windows “hosts” file (typically at \winnt\system32\ drivers\etc\hosts—edit using Notepad). The line format should be “IP address any name.kvm.net”. (For example: 192.168.2.155BelkinSMB.kvm.net.)

Device Name

Type in a name you would like to assign the Switch. The default device name consists of the letter “D” followed by the 7-digit device number located on the back of the Switch.

First TCP Port

Choose three consecutive Transmission Control Protocol (TCP) ports, and type in the first port number of the series. The default port is port 900. This is suitable for the majority of installations.

Note: Your firewall or router security access list must enable inbound communication through the selected TCP ports for the Switch’s address. Ports 80 and 443 are used for standard Web communication and should be open. For client-computer access from a secured LAN, the selected ports should be open for outbound communication.

1

2

3

4

5

6

7

8

9

10

section

31

Image 35
Contents OmniView SMB KVM-over-IP Switch Page Table of Contents Using the Switch from a Local Console Using the Switch from a Remote ConsoleIntroduction Package ContentsOverview Remote-Management FeaturesOther Features Interface Modules Equipment RequirementsServer Interface Modules OmniView SMB ServerBelkin UTP Patch Cables CablesSystem Requirements Back View Unit Display DiagramsFront View Specifications SMB Server Interface Module, PS/2 VGA-Cable Length MiniDIN8-Cable Length SMB Server Interface Module, USBSMB Server Interface Module, Legacy Sun VGA-Cable Length USB-Cable LengthWhere to place the Switch Local InstallationPre-Configuration Cable-Distance Requirements for PS/2, USB, and Sun Servers Mounting the Switch Local InstallationConnecting the Console to the Switch Local Installation Connecting Servers to the Switch PS/2 Connection Local Installation Connecting Servers to the Switch USB Connection Local Installation Connecting Servers to the Switch Sun MiniDIN8 Connection Local Installation Powering Up the Systems How to Assign a Bank Address Daisy-Chaining Multiple KVM Switches OptionalDIP SWITCH# SMB CAT5 Bank Address BANK-DIP-Switch-Configuration Chart SMB CAT5 KVM SwitchesExample of Daisy-Chain Configuration Getting Started Connecting the Primary and Secondary KVM SwitchesConnecting the servers Identifying the IP Address Remote InstallationTo log into the web interface Logging into the Web InterfaceRemote Installation First TCP Port Network ConfigurationDevice Name Set a Static IP Enable DhcpUser User SettingsAdministrator To add a new user View OnlyTo block a user To edit a userTo delete a user Blocking a standard user and View Only userSwitch-Configuration Switch ConfigurationTo specify and name servers Installing new Switch-Definition Files SDFsTo install the SDF To configure your serial device Serial SettingsAccount Blocking Security SettingsPassword Policy SSL Certificate Idle TimeoutTo install an SSL certificate Firmware Upgrade To upgrade firmware MaintenanceLogging Out Restore Factory SettingsTo restore factory settings To start a remote session Using the Switch from a Remote ConsoleStarting a Remote Session To work in full-screen mode Full-Screen ModeDisconnecting the Remote Session Using the Quick-Access ToolbarMoving or Hiding the Quick-Access Toolbar Mouse-Pointer Calibration Mouse Configuration and SettingsMouse-Pointer Alignment To align mouse pointersTo manually synchronize mouse pointers Manual SettingsYou must manually synchronize the mouse pointers if Mouse-Pointer Options Windows XP USB OptionAdvanced-Mouse Emulation To change the mouse-emulation settingsTo add a keyboard sequence Keyboard Configuration and SettingsTo transmit a keyboard sequence Add-Special-Key Box To record a keyboard sequenceTo adjust the video manually Video Configuration and SettingsManual Video Adjust To refresh the video settingsTo adjust the video automatically Auto Video AdjustTo change the bandwidth settings Performance Settings BandwidthTo connect to a different server Selecting a ServerAdditional Features To restore factory defaults Restoring Factory DefaultsSelecting a Server or Bank Using the Switch from a Local ConsoleSelecting a Server or Bank Using Hot Keys Down Selecting a Bank Using Scroll Buttons Selecting a Server Using Port SelectorsAutoScan Mode Main OSD-Menu On-Screen Display OSDFunction/Help OSD-Menu Keyboard CommandsScan Time Function/Help-Page Keyboard CommandsAdmin Password ScanHot Key TimeoutMonitor-DDC2 Feature Hot-Key-Command Shortcuts Sun Key Combo Key Sun Combo KeysUpdating Firmware Can I use the Switch on my Sun server that supports USB? Frequently Asked QuestionsFrequently Asked Questions General ProblemSolution Local ConsoleMouse KeyboardUSB Remote Console Video quality is bad and/or grainy Glossary Section FCC Statement Belkin Corporation Limited 2-Year Product WarrantyInformation How to get serviceBelkin Tech Support
Related manuals
Manual 84 pages 11.57 Kb