Operation
Command Syntax
Command The
one or more parameters, a short code that changes the state of the power supply or the state of the bit register. Table 3.1, “Command Parameters” lists the parameters that affect the command set.
Format:
COMMAND or
COMMAND <parameter> or
COMMAND <parameter>,<parameter>
•You can enter commands in upper or lower case lettering.
Example: | MASK FOLD = mask fold |
•Do not further abbreviate command names or parameters.
Example: | MASK FOLD ≠ MK FOLD |
| MASK FOLD ≠ MASK FD |
•Use a space between the command and the first parameter. Any number of consecutive spaces is treated as one space. Numeric data may contain leading spaces. Embedded spaces between digits or between a digit and a decimal point are not accepted.
Example: | MASK FOLD = MASK | FOLD | |
| VOUT 3.4 | = VOUT | 3.4 |
| VOUT 3.4 | ≠ VOUT 3. | 4 |
•Use commas between parameters in those commands with more than one parameter, and between mnemonic parameters as in the MASK and UNMASK commands. Only one comma is allowed and it may be preceded or followed by any number of spaces.
Example: | MASK CV, OV, FOLD |
38 | Operating Manual for |