Introduction | Structure of the Manual |
1.3Structure of the Manual
The PRIMERGY S60 storage subsystem manual describes how to install and configure the subsystem and perform expansions or upgrades.
You will find further information (see also entries in the chapter “Related publi- cations” on page 81):
●in the “Safety, Warranty and Ergonomics” manual
●in the documentation on the PRIMERGY server This manual consists of the following chapters:
●Important notes
This chapter contains instructions on the safe operation of your storage subsystem as well as information about environmental protection.
●Operating and indicator elements
This chapter gives a detailed description of the operating panel and the connecting elements on the rear panel of the storage subsystem.
●Floorstand model
This part of the manual describes how opening and closing the floorstand model housing.
●Power supply
This part of the manual describes the power supply units and their power supply. Fitting and removing power supply units is also described in detail.
●Fan module
This part of the manual describes the fitting and removal of the fan module.
●FC drives
This chapter describes in detail how the hot swappable drives must be dealt with.
●Plug-in board modules
This chapter describes the
●Connections
This chapter describes the FC and the mains connection.
The possibilities of supplying the storage subsystem with mains voltage are also described.
3 |