The Front | Operating and Indicator Elements |
3.1.1Meaning of the S60 Operating Status LEDs
The state of the status LEDs located on the HDD backplane is transmitted by optical waveguides so that the power supply status, the cooling status and the server management status are indicated on the front of the storage subsystem.
1 |
|
2 |
|
3 | ! |
Figure 2: Operating Status LEDs and Icons on the Front of the Rack Model
(1)Power supply status
(2)Cooling status
(3)Server management status
VCAUTION!
In order to guarantee the server management for the PRIMERGY S60 storage subsystem over SES (SCSI Enclosure Service), at least one of the two first HDD modules (see also section “Identification Marks and Loop Addresses” on page 43) must be installed.
IFault clearing instructions can be found in the chapter “Troubleshooting” on page 71 of this manual.
16 |