Cisco Systems ME3600X24CXM manual Power Supply Module Input LED Description

Chapter 1 Product Overview

Front Panel

Power Supply Module Input LED Description

Table 1-5	PS IN 1 and PS IN 2 LEDs
Color	System Status
Off	Power supply module (1 or 2) is not installed.
Green	Power supply module (1 or 2) is installed and receiving power.
Amber	Power supply module (1 or 2) is installed but not receiving power in an acceptable range.

Power Supply and Fan LED Description

Table 1-6	PS/FAN1 and PS/FAN 2 LEDs
Color	System Status
Off	Power supply module (1 or 2) is either not installed or not producing power.
	Fan module is not installed.
Green	Power supply module (1 or 2) is installed and producing power in an acceptable range;
	the fans are operating normally.
	Fan module is installed; the fans are operating normally.
Red	Power supply module (1 or 2) is installed but not producing power in an acceptable range,
	or a fan has failed.
	Fan module is installed, but one of the fans has failed.

Ethernet Management Port LED Description

Table 1-7	Ethernet Management Port LED
Color		System Status
Off		No link, or port was administratively shut down.
Green		Link present but not sending or receiving data.
Blinking green		Activity. Port is sending or receiving data.
Alternating		Link fault. Error frames can affect connectivity, and errors such as excessive
green/amber		collisions, CRC1 errors, and alignment and jabber errors2 are monitored for a
		link-fault indication.

1.CRC = cyclic redundancy check.

2.Jabber errors occur when data packets exceed the prescribed lengths.

Cisco ME 3800X and ME 3600X Switch Hardware Installation Guide

1-8 OL-22168-01