Cisco Systems ME3600X24CXM Power Supply and Fan Module Installation, Equipment That You Supply

Page 44

Chapter 3 Installing and Removing AC and DC Input Power Supply and Fan Modules

Power Supply and Fan Module Installation

Figure 3-4 Power Supply and Fan Module Connector Side

1

1

1

207449

2

1

Fans

2

Connector pins

Power Supply and Fan Module Installation

•Equipment That You Supply, page 3-4

•Installation Guidelines, page 3-4

•Installing an AC Power Supply Module, page 3-5

•Installing a DC Power Supply Module, page 3-7

•Installing a Fan Module, page 3-13

Equipment That You Supply

You need a ratcheting screwdriver with a Phillips head that exerts up to 15 inch-pounds (in-lb) of torque.

Installation Guidelines

Observe these guidelines when you install a fan or power supply module:

•Do not force the fan or power supply module into the slot. This can damage the pins on the switch if they are not aligned with the unit.

•A fan or power supply module that is only partially connected to the switch can disrupt the system operation.

•Verify that you are using the correct power cord.

Warning Do not reach into a vacant slot or chassis while you install or remove a module or a fan. Exposed circuitry could constitute an energy hazard. Statement 206

Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030

Cisco ME 3800X and ME 3600X Switch Hardware Installation Guide

3-4	OL-22168-01

Image 44

Contents Americas Headquarters Text Part Number OL-22168-01Page Audience PurposeRelated Publications Obtaining Documentation and Submitting a Service Request OL-22168-01 Setting Up the Switch Switch ModelsSwitch Model Description Front PanelAlarm Input Port Bits PortSFP+ and SFP Modules Management and Console Port10/100/1000 Gigabit Ethernet Ports Part Number Description Dwdm CAB-SFP-50CMSFP Module Patch Cable SD Memory SlotLEDs Color System Status Switch LED PanelsSystem LED Description Ethernet Management Port LED Description Power Supply Module Input LED DescriptionPower Supply and Fan LED Description SD Card LED Description Alarm LEDs DescriptionSync LED Description LED Color Meaning Rear PanelPort LEDs Description Power Supply Module Features Power Supply Module LEDsFan Module Management Options Fan Module LEDNetwork Configurations Switch Installation Switch Installation 122F 50C Statement Installation Guidelines Verifying Switch OperationRack-Mounting Installing the SwitchPowering Off the Switch Attaching Brackets to the Switch Rack-Mounting BracketsAttaching Brackets for 19-Inch Racks Attaching Brackets for 23-Inch Racks Attaching Brackets for Etsi Racks Attaching Angle Brackets for 23-Inch Racks Mounting the Switch Mounting in a RackMounting the Switch Using 23-Inch Angle Brackets Wall-Mounting Attaching Brackets for Wall-MountingMounting the Switch on a Wall Mounting Cisco ME 3800X on a WallTable- or Shelf-Mounting Installing and Removing SFP+ and SFP ModulesInstalling SFP+ and SFP Modules 11 Installing an SFP+ Module into an SFP+ Module Slot Removing SFP+ or SFP ModulesInserting and Removing the SFP+ Module Patch Cable 12 Removing a Bale-Clasp Latch SFP+ Module14 Connecting Two Switches with an SFP+ Module Patch Cable Connecting to the 10/100/1000 Ports 15 Connecting to an Ethernet PortConnecting to Fiber-Optic SFP+ and SFP Modules Where to Go NextPower Supply Module Description Model number DescriptionAC Input Power Supply Module Handle Side Connector-Side Description Fan Module DescriptionEquipment That You Supply Power Supply and Fan Module InstallationInstallation Guidelines Installing an AC Power Supply Module AC-1 PSU-1 AC-2 PSU-2Removing AC Power Supply Modules AC Power Supply Module and Power-Cord Retainer in a SwitchInstalling a DC Power Supply Module Preparing for InstallationGrounding the Switch Stripping the Ground WireCrimping the Ground Lug 24VDC 30A Installing the DC Power Supply Module in the SwitchWiring the DC Input Power Source Inch 8.9 mm ± 0.02 inch 0.5 mm 3 Wire lead Insulation Removing the DC Power Supply Module Installing a Fan Module 14 Inserting a Fan Module in a SwitchOL-22168-01 Diagnosing Problems Switch Post ResultsSwitch LEDs Switch ConnectionsBad or Damaged Cable Ethernet and Fiber CablesSFP+ and SFP Module Port Issues Port and Interface SettingsPing the End Device Spanning Tree LoopsClearing the Switch IP Address and Configuration Switch PerformanceSpeed, Duplex, and Autonegotiation Autonegotiation and NICsFinding the Switch Serial Number Serial Number Location on the Cisco ME 3800X and MEOL-22168-01 Technical Specifications Environmental RangesDC Power Requirements Physical DimensionsAC Power Requirements Table A-3 Technical Specifications-ME-3600X-24FS-M Table A-4 Technical Specifications-ME-3600X-24TS-M Physical Specifications Power SpecificationsOL-22168-01 Connector Specifications 10/100/1000SFP and SFP+ Module Connectors Copper SFP Module RJ-45 Connector10/100/1000 Ethernet Management Port Figure B-5 SFP Module Patch CablePin Signal Direction Description TX TIPCore Modal Wavelength Cables and AdaptersSFP and SFP+ Module Cabling Dwdm Cable Pinouts TP3Console Port Adapter Pinouts Figure B-11Switch Console RJ-45-to-DB-25 Port DTE DSR DTR CTS RTSOL-22168-01 Accessing the CLI Through the Console Port Starting the Terminal-Emulation SoftwareCompleting the Setup Program Entering the Initial Configuration InformationIP Settings Enter an enable password, and press Return These choices appear