Appendix 4 Troubleshooting
Finding the Switch Serial Number
To reset the switch:
1.At the switch prompt, enter enable, and press Return or Enter.
2.At the privileged EXEC prompt, switch#, enter setup, and press Return or Enter.
The switch displays the prompt to run the initial configuration dialog. The switch now behaves like an unconfigured switch. You can configure the switch by using the CLI setup procedure described in Appendix C, “Configuring the Switch with the
Finding the Switch Serial Number
If you contact Cisco Technical Assistance, you need to know the serial number of your switch. Use these figures to locate the serial number location. You can also use the show version privileged EXEC command or the show inventory user EXEC command to get the serial number.
Figure 4-1 Serial Number Location on the Cisco ME 3800X and ME 3600X
208326
SN: XXXNNNNXXXX
Cisco ME 3800X and ME 3600X Switch Hardware Installation Guide
|
| ||
|
|