Cisco Systems ME3600X24CXM manual Physical Specifications, Power Specifications

Page 65

Appendix A Technical Specifications

Environmental and Technical Specifications for the Power Supply and Fan Modules

Environmental and Technical Specifications for the Power Supply and Fan Modules

Table A-5 Environmental and Physical Specifications for the AC and DC Input Power Supply and Fan Modules

Environmental Ranges

Operating temperature

 

–40 to 122°F (–40 to 50°C)

 

 

 

 

Storage temperature

 

–49 to 185°F (–45 to 85°C)

 

 

 

 

Relative humidity

 

5 to 95% (noncondensing)

 

 

 

 

 

Altitude

 

 

Up to 10,000 ft (3049 m)

 

 

 

 

Physical Specifications

 

 

 

 

 

 

 

 

Weight

 

 

AC: 2.9 lb (1.32 kg)

 

 

 

DC: 3.1 lb (1.41 kg)

 

 

 

Fan: 1.65 lb (0.75 kg)

 

 

 

 

Dimensions (H x W x D)

 

1.64 x 8.55 x 5.94 in. (4.16 x 21.72 x 15.09 cm)

 

 

 

 

 

Table A-6

Technical Specifications for the AC Power Supply Module

 

 

 

 

Power Specifications

 

 

 

 

 

 

Maximum output power

390 W

 

 

 

Input voltage range and frequency

100 to 240 VAC ± 10% (autoranging), 50 to 60 Hz

 

 

 

 

Input current

 

5 to 2.5 A

 

 

Note For AC input, a 5A fuse is recommended.

 

 

 

Maximum output ratings

12 V @ 32.5 A

 

 

 

Total input BTU

1705 BTUs per hour

 

 

 

 

Table A-7

Technical Specifications for the DC Power Supply Module

 

 

 

 

Power Specifications

 

 

 

 

 

 

Maximum output power

390 W

 

 

 

Input voltage range

18 to 32 VDC and 36 to 72 VDC

 

 

 

 

Input current

 

30 A maximum at minimum input 18VDC

 

 

15 A maximum at maximum input voltage 72VDC

 

 

Note For DC input, a 25A fuse is recommended.

 

 

 

Maximum output ratings

12 V @ 32.5 A

 

 

 

Total input BTU

1840 BTUs per hour

 

 

 

 

 

Cisco ME 3800X and ME 3600X Switch Hardware Installation Guide

 

OL-22168-01

A-5

 

Image 65
Contents Text Part Number OL-22168-01 Americas HeadquartersPage Purpose AudienceRelated Publications Obtaining Documentation and Submitting a Service Request OL-22168-01 Switch Models Setting Up the SwitchFront Panel Switch Model DescriptionBits Port Alarm Input PortSFP+ and SFP Modules Management and Console Port10/100/1000 Gigabit Ethernet Ports Dwdm CAB-SFP-50CM Part Number DescriptionSFP Module Patch Cable SD Memory SlotLEDs Color System Status Switch LED PanelsSystem LED Description Ethernet Management Port LED Description Power Supply Module Input LED DescriptionPower Supply and Fan LED Description SD Card LED Description Alarm LEDs DescriptionSync LED Description LED Color Meaning Rear PanelPort LEDs Description Power Supply Module LEDs Power Supply Module FeaturesFan Module Fan Module LED Management OptionsNetwork Configurations Switch Installation Switch Installation 122F 50C Statement Verifying Switch Operation Installation GuidelinesRack-Mounting Installing the SwitchPowering Off the Switch Rack-Mounting Brackets Attaching Brackets to the SwitchAttaching Brackets for 19-Inch Racks Attaching Brackets for 23-Inch Racks Attaching Brackets for Etsi Racks Attaching Angle Brackets for 23-Inch Racks Mounting in a Rack Mounting the SwitchMounting the Switch Using 23-Inch Angle Brackets Attaching Brackets for Wall-Mounting Wall-MountingMounting Cisco ME 3800X on a Wall Mounting the Switch on a WallTable- or Shelf-Mounting Installing and Removing SFP+ and SFP ModulesInstalling SFP+ and SFP Modules Removing SFP+ or SFP Modules 11 Installing an SFP+ Module into an SFP+ Module Slot12 Removing a Bale-Clasp Latch SFP+ Module Inserting and Removing the SFP+ Module Patch Cable14 Connecting Two Switches with an SFP+ Module Patch Cable 15 Connecting to an Ethernet Port Connecting to the 10/100/1000 PortsWhere to Go Next Connecting to Fiber-Optic SFP+ and SFP ModulesModel number Description Power Supply Module DescriptionAC Input Power Supply Module Handle Side Fan Module Description Connector-Side DescriptionEquipment That You Supply Power Supply and Fan Module InstallationInstallation Guidelines AC-1 PSU-1 AC-2 PSU-2 Installing an AC Power Supply ModuleAC Power Supply Module and Power-Cord Retainer in a Switch Removing AC Power Supply ModulesPreparing for Installation Installing a DC Power Supply ModuleStripping the Ground Wire Grounding the SwitchCrimping the Ground Lug 24VDC 30A Installing the DC Power Supply Module in the SwitchWiring the DC Input Power Source Inch 8.9 mm ± 0.02 inch 0.5 mm 3 Wire lead Insulation Removing the DC Power Supply Module 14 Inserting a Fan Module in a Switch Installing a Fan ModuleOL-22168-01 Switch Post Results Diagnosing ProblemsSwitch Connections Switch LEDsBad or Damaged Cable Ethernet and Fiber CablesPort and Interface Settings SFP+ and SFP Module Port IssuesPing the End Device Spanning Tree LoopsSwitch Performance Clearing the Switch IP Address and ConfigurationSpeed, Duplex, and Autonegotiation Autonegotiation and NICsSerial Number Location on the Cisco ME 3800X and ME Finding the Switch Serial NumberOL-22168-01 Environmental Ranges Technical SpecificationsDC Power Requirements Physical DimensionsAC Power Requirements Table A-3 Technical Specifications-ME-3600X-24FS-M Table A-4 Technical Specifications-ME-3600X-24TS-M Power Specifications Physical SpecificationsOL-22168-01 10/100/1000 Connector SpecificationsCopper SFP Module RJ-45 Connector SFP and SFP+ Module ConnectorsFigure B-5 SFP Module Patch Cable 10/100/1000 Ethernet Management PortTX TIP Pin Signal Direction DescriptionCore Modal Wavelength Cables and AdaptersSFP and SFP+ Module Cabling Dwdm TP3 Cable PinoutsFigure B-11 Console Port Adapter PinoutsDSR DTR CTS RTS Switch Console RJ-45-to-DB-25 Port DTEOL-22168-01 Starting the Terminal-Emulation Software Accessing the CLI Through the Console PortCompleting the Setup Program Entering the Initial Configuration InformationIP Settings Enter an enable password, and press Return These choices appear