Cisco Systems ME3600X24CXM manual Installing a Fan Module, Inserting a Fan Module in a Switch

Chapter 3 Installing and Removing AC and DC Input Power Supply and Fan Modules

Power Supply and Fan Module Installation

Installing a Fan Module

Step 1 Insert the new fan module in the power supply module slot, and gently push it into the slot (Figure 3-14). When correctly inserted, the fan module is flush with the switch rear panel.

Figure 3-14 Inserting a Fan Module in a Switch

207480

Step 2 Align the two captive screws with the screw holes in the panel. Use a ratcheting torque screwdriver to torque each screw to 10 in-lb.

Step 3 From the front of the switch, confirm that the PS/FAN LED is green. If you can access the switch rear panel, verify that the FAN LED is green. See the “Fan Module LED” section on page 1-13for a description of the fan module LED. See the “Switch LED Panels” section on page 1-7for system LED descriptions.

	Cisco ME 3800X and ME 3600X Switch Hardware Installation Guide
OL-22168-01		3-13