Cisco Systems ME3600X24CXM manual Attaching Brackets for Wall-Mounting

Chapter 2 Switch Installation

Installing the Switch

After the switch is mounted in the rack, you need to do these tasks to complete the installation:

•Power on the switch. See the “Verifying Switch Operation” section on page 2-4.

•Connect to the console port, and run the initial configuration. See the Cisco ME 3800X and ME 3600X Switch Getting Started Guide for instructions.

•Connect to the front-panel ports. See the “Connecting to the 10/100/1000 Ports” section on page 2-19and the “Connecting to Fiber-Optic SFP+ and SFP Modules” section on page 2-20.

For configuration instructions about using the CLI setup program, go to Appendix C, “Configuring the Switch with the CLI-Based Setup Program.”

Wall-Mounting

•Attaching Brackets for Wall-Mounting, page 2-13

•Mounting the Switch on a Wall, page 2-14

Note Wall-mounting is not supported for NEBS applications.

Attaching Brackets for Wall-Mounting

Figure 2-8 Attaching 19-inch Bracket to Wall-Mount Cisco ME 3800X

1 22 23 24

1 24X

2

1

207931

1

Phillips truss-head screws

Follow the same steps to attach the second bracket to the opposite side.

	Cisco ME 3800X and ME 3600X Switch Hardware Installation Guide
OL-22168-01		2-13