Cisco Systems ATA 188 manual OpFlags, TftpURL, DHCP, VLANSetting

Chapter 5 Parameters and Defaults

Operating Parameters

Table 5-5	SigTimer Parameter Bit Definitions (continued)
Bit Number		Definition
20-25		Not used by H.323.
26-27		Minimum hook flash time—The minimum on-hook time required for hook flash event.
		Range: 0 to 3
		Default: 0 (60 ms)
		Other possible values: 1=100 ms, 2=200 ms, 3=300 ms.
28-31		Maximum hook flash time—The maximum on-hook time allowed for hook flash event.
		Range: 0 to 15
		Default: 0 (1000 ms)
		Other possible values: 1=100 ms, 2=200 ms, 3=300 ms, 4=400 ms, 5=500 ms, 6=600 ms, 7=700 ms, 8=800
		ms, 9=900 ms, 10=1000 ms, 11=1100 ms, 12=1200 ms, 13=1300 ms, 14=1400 ms, 15=1500 ms.

OpFlags

Description

This parameter enables/disables various operational features.

See Table 5-6 on page 5-33for bit definitions of this parameter.

Value Type

Bitmap

Default 0x2

Voice Configuration Menu Access Code 323

Related Parameters

•TftpURL, page 5-5

•DHCP, page 5-7

•VLANSetting, page 5-34

Table 5-6 OpFlags Parameter Operational Features to Turn On or Off

Bit Number Definition

0If Bit 0 = 0, the TFTP configuration filename supplied by the DHCP server overwrites the default filename for each Cisco ATA.

If Bit 0 = 1, the default Cisco ATA filename is always used.

1If Bit 1 = 0, the Cisco ATA probes the static network router during the power-up process. If Bit 1 = 1, static network router probing is disabled.

2Reserved.

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (H.323)

OL-4008-01 5-33