Cisco Systems ATA 188 manual Parameters and Defaults

C H A P T E R 5

Parameters and Defaults

This section provides information on the parameters and defaults that you can use to create your own Cisco ATA configuration file. This section also includes the voice configuration menu code for each parameter that has such a code.

Some parameters on the Web Configuration screen are not used for H.323; only those used for H.323 are covered in this section.

Parameters are divided into categories based on their functionality. The following categories of parameters are covered in this section:

•User Interface (UI) Parameter, page 5-3

•Configuration-Complete Parameter, page 5-4

•Parameters for Configuration Method and Encryption, page 5-4

•Network Parameters, page 5-7

•Account Information Parameters, page 5-9

•Gatekeeper Parameters, page 5-15

•H.323 Mode Parameter, page 5-18

•Operating Parameters, page 5-18

•Optional Feature Parameters, page 5-35

The following list contains general configuration information:

•Your configuration file must begin with #txt.

•The Cisco ATA uses the following parameter types:

–Alphanumeric string

–Array of short integers

–Boolean (1 or 0)

–Bitmap value—unsigned hexadecimal integer (for specifying bits in a 32-bit integer)

–Extended IP address—IP address followed by port number (for example, 192.168.2.170.9001)

–IP address (e.g. 192.168.2.170)

–Integer (32-bit integer)

–Numeric digit string

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (H.323)

OL-4008-01 5-1