Default Boot Load Behavior

Chapter 3 Configuring the Cisco ATA for H.323

•Cisco ATA Web Configuration Page, page 3-18—This section shows the Cisco ATA Web configuration page and contains a procedure for how to configure Cisco ATA parameters using this interface.

•Web Interface Access-Control Configuration, page 3-20

•Refreshing or Resetting the Cisco ATA, page 3-20—This section gives the procedure (via the Web configuration page) for refreshing or resetting the Cisco ATA so that your most recent configuration changes take effect immediately.

•Upgrading the H.323 Signaling Image, page 3-21—This section provides references to the various means of upgrading your Cisco ATA signaling image.

Note The term Cisco ATA is used throughout this manual to refer to both the Cisco ATA 186 and the Cisco ATA 188, unless differences between the Cisco ATA 186 and Cisco ATA 188 are explicitly stated.

Before configuring the Cisco ATA, you need to know how the default Cisco ATA boot load process works. Once you understand this process, you will be able to configure the Cisco ATA by following the instructions provided in this section and in the sections that follow.

All Cisco ATAs are shipped with a boot load signaling-protocol image. However, because this image is not a fully functional signaling image, the image must be upgraded. The image is designed to be automatically upgraded by a properly configured TFTP server. To configure the Cisco ATA to automatically upgrade to the latest signaling image, see the “Upgrading the Signaling Image from a TFTP Server” section on page 8-1.

In addition, the Cisco ATA obtains its configuration file during the boot load process.

The following list summarizes the default Cisco ATA behavior during its boot-up process:

1.The Cisco ATA uses the Cisco Discovery Protocol (CDP) to discover which VLAN to enter. If the Cisco ATA receives a VLAN ID response from the network switch, the Cisco ATA enters that VLAN and adds 802.1Q VLAN tags to its IP packets. If the Cisco ATA does not receive a response with a VLAN ID from the network switch, then the Cisco ATA assumes it is not operating in a VLAN environment and does not perform VLAN tagging on its packets.

Note If your network environment is not set up to handle this default behavior, make the necessary configuration changes by referring to the “Specifying a Preconfigured VLAN ID or Disabling VLAN IP Encapsulation” section on page 3-3.

2.The Cisco ATA contacts the DHCP server to request its own IP address.

Note If your network environment does not contain a DHCP server, you need to statically configure various IP addresses so that the Cisco ATA can obtain network connectivity. For a list of parameters that you must configure to obtain network connectivity, see Table 3-5 on page 3-16. For instructions on how to use the voice configuration menu, which you must use to perform this configuration, see the “Voice Configuration Menu” section on page 3-15.

3.Also from the DHCP server, the Cisco ATA requests the IP address of the TFTP server.

Cisco ATA 186 and Cisco ATA 188 Analog Telephone Adaptor Administrator’s Guide (H.323)

3-2	OL-4008-01

ATA 188 specifications

The Cisco Systems ATA 188 is a versatile Analog Telephone Adapter designed to facilitate the integration of traditional telephone systems with Voice over Internet Protocol (VoIP) networks. This device has been key in bridging the gap between legacy telephony and modern IP-based communication, allowing users to leverage their existing analog phones while enjoying the benefits of digital connectivity.

One of the main features of the ATA 188 is its ability to connect regular analog phones to a VoIP network, enabling users to make and receive calls over the internet. This significantly reduces calling costs, especially for long-distance and international calls. The ATA 188 supports two phone lines, allowing simultaneous voice calls. This dual-line capability makes it a suitable choice for small businesses or home offices that require multiple lines without the need for extensive infrastructure.

The device is equipped with various technologies that enhance its functionality. It supports the Session Initiation Protocol (SIP) and H.323, making it compatible with a wide range of VoIP service providers. Additionally, the ATA 188 features Quality of Service (QoS) settings, which prioritize voice traffic over the internet, ensuring clear voice quality without interruptions or delays. This is essential for maintaining a professional communication experience, especially in business environments.

Another characteristic of the ATA 188 is its user-friendly configuration interface. It allows users to easily set up and manage their devices through a web-based portal. The configuration process is straightforward, with options to adjust settings such as codec selection, call features including call waiting, and call forwarding functionalities.

Security is also a priority for the ATA 188, as it provides robust protocols to protect call data. The device supports Secure Real-time Transport Protocol (SRTP) and Transport Layer Security (TLS) to encrypt voice traffic and manage signaling securely. This ensures that sensitive conversations remain confidential.

Overall, the Cisco Systems ATA 188 is a reliable and efficient solution for users looking to transition from traditional telephony to VoIP. Its dual-line capacity, compatibility with multiple VoIP standards, user-friendly configuration, and built-in security features make it a valuable asset for both personal and professional communication solutions. In an ever-evolving telecommunications landscape, the ATA 188 remains a relevant and practical choice for integrating legacy telephony with modern internet-based services.

Default Boot Load Behavior

OL-4008-01

ATA 188 specifications