Cisco Systems Cisco ASR 1006 quick start Connect the Shared Port Adapter Cables

–Connect to the port using the RJ-45-to-RJ-45 cable and RJ-45-to-DB-25 DTE adapter or using the RJ-45-to-DB-9 DTE adapter.

Figure 8 Management Ethernet Port Connectors

				C	/A
		C	/A	A/L
C	/A	A	/L		3
A	/L			2
		1		C	/A
0		C	/A	A/L
C	/A	A	/L		3
A	/L			2
		1
0
				C/A
		C	/A	A/L
C	/A	A	/L		3
A	/L			2
		1		C/A
0		C	/A	A/L
C/A		A	/L		3
A	/L			2
		1
0
				C/A
		C	/A	A	/L
C	/A	A	/L		3
A	/L			2
		1		C/A
0		C	/A	A	/L
C	/A	A	/L		3
A	/L			2
		1
0

C	/A	T U	S
	/L	T A
A		S

		SPA-4XOC3	-POS
C	/A			T U	S
	/L		S	T A
A
		SPA-4XOC3	-POS
C	/A			T U	S
A/L			S	T A
		SPA-4XOC3	-POS
C	/A			TUS
	/L		S	T A
A
		SPA-4XOC3	-POS
C	/A			T U	S
A/L			S	T A
		SPA-4XOC3	-POS
C	/A			T U	S
A/L			S	T A
		SPA-4XOC3	-POS

			C/A
		C	/A	/L
			A
C	/A	A	/L
A	/L		2
		1	C/A
0		C	/A	/L
			A
C	/A	A	/L
A/	L
			2
		1
0
			C/A
		C	/A	/L
			A
C	/A	A	/L
A	/L		2
		1	C/A
0		C	/A	/L
			A
C	/A	A	/L
A	/L		2
		1
0
			C/A
		C	/A	/L
			A
C	/A	A	/L
A/	L
			2
		1	C/A
0		C	/A	/L
			A
C	/A	A/	L
A/	L
			2
		1
0

C	/A	T US
A/	L	T A
		S

		SPA-4XOC3	-POS
3
C	/A				T U	S
A/	L		ST		A
		SPA-4XOC3	-POS
3
C	/A				T U	S
A/L			S	T	A
		SPA-4XOC3	-POS
3
C	/A				T U	S
A/L			S	T	A
		SPA-4XOC3	-POS
3
C	/A				T U	S
A/L			S	T	A
		SPA-4XOC3	-POS
3
C	/A				T U	S
A/L			S	T	A
		SPA-4XOC3	-POS
3

4 3 2 1

280086

1	AUXiliary connection	3	BITS port
2	MGMT Ethernet port	4	Cable-management U feature device

Step 3 Insert an Ethernet RJ-45 cable into the MGMT ETHERNET port.

Step 4 Insert the other end of the RJ-45 cable to your management device or network.

Step 5 Configure to a fixed speed through the command line interface (CLI) commands.

Connect the Shared Port Adapter Cables

The instructions for connecting the cables for the shared port adapter installed in the Cisco ASR 1006 Router are contained in the Cisco ASR 1000 Series Aggregation Services Routers SPA and SIP Hardware Installation Guide.

14