Where to Go Next
Where to Go Next
Now that you have learned some CiscoIOS software basics, you can begin to configure the ATM switch router.
Remember that:
•You can use the question mark (?) and arrow keys to help you enter commands.
•Each command mode restricts you to a set of commands. If you have difficulty entering a command, check the prompt and then enter the question mark (?) for a list of available commands. You might be in the wrong command mode or using the wrong syntax.
•If you want to disable a feature, enter the keyword no before the command; for example, no atm router pnni.
•You need to save your configuration changes to NVRAM so that they will not be lost if a system reload or power outage occurs.
Proceed to the next chapter, “Getting Started,” to begin configuring the ATM switch router.