Cisco Systems 78-6897-01 manual Chapter Configuring Lane

Chapter 3	Configuring SVCs, PVCs, SoftPVCs, PVPs, and VPTunnels								3-1
	Configuring SVCs		3-1
	Configuring the Router			3-2
	Configuring Signaling on the Routers						3-3
	Configuring the IP Address and ESI Address							3-4
	Determining the NSAP Address					3-6
	Configure a Map Group and Map List 3-7
	Configuring PVCs		3-9
	Configuring the ATM Switch Router						3-10
	Configuring the Router			3-12
	Configuring Soft PVCs			3-13
	Configuring the ATM Switch Router						3-14
	Determining the Destination ATM Switch Router NSAP
	Address	3-15
	Configuring the Source ATM Switch Router							3-16
	Configuring the Router			3-17
	Configuring PVPs		3-19
	Configuring VP Tunnels			3-21
Chapter 4	Configuring LANE 4-1
	Understanding LANE on ATM				4-2
	Understanding LANE Components					4-2
	Implementing LANE		4-3
	Supporting LAN Protocols				4-3
	Addressing	4-3
	Assigning Components to Interfaces and Subinterfaces 4-4
	Configuring LANE Router and LAN Switch Requirements								4-4
	Configuring a LEC		4-5
	Configuring the LECS 4-6
	Configuring the ATM Address of the LECS							4-6
	Configuring the LECS Database					4-7
	Configuring the LES/BUS			4-8

viATMSwitch Router Quick Software Configuration Guide