Cisco Systems 78-6897-01 manual ATM Switch Router, ATMSwitch# configure terminal

LANE Configuration Examples

ATM Switch Router

ATM_Switch# show lane default-atm-addresses interface ATM0:

LANE Client:		47.00918100000000E04FACB401.00E04FACB402.**
LANE	Server:	47.00918100000000E04FACB401.00E04FACB403.**
LANE	Bus:	47.00918100000000E04FACB401.00E04FACB404.**

LANE Config Server: 47.00918100000000E04FACB401.00E04FACB405.00

note: ** is the subinterface number byte in hex

ATM_Switch# configure terminal

Enter configuration commands, one per line. End with CNTL/Z. ATM_Switch(config)# atm lecs-address-default 47.00918100000000E04FACB401.00E04FACB405.00 ATM_Switch(config)# end

ATM_Switch#

ATM_Switch# copy system:running-config nvram:startup-config

Building configuration...

[OK]

ATM_Switch# configure terminal

Enter configuration commands, one per line. End with CNTL/Z. ATM_Switch(config)# lane database eng_dbase ATM_Switch(lane-config-database)# name eng_elan server-atm-address 47.00918100000000E04FACB401.00E04FACB403.01 ATM_Switch(lane-config-database)# default-name eng_elan ATM_Switch(lane-config-database)# end

ATM_Switch# show lane database

LANE Config Server database table 'eng_dbase' default elan: eng_elan

elan 'eng_elan': un-restricted

server 47.00918100000000E04FACB401.00E04FACB403.01 (prio 0)

ATM_Switch# configure terminal

Enter configuration commands, one per line. End with CNTL/Z. ATM_Switch(config)# interface atm 0 ATM_Switch(config-if)# lane config database eng_dbase ATM_Switch(config-if)# lane config auto-config-atm-addressATM_Switch(config-if)# exit

ATM_Switch(config)# end

4-10ATMSwitch Router Quick Software Configuration Guide