Configuring PVCs
| VPI/VCIs for the Example PVC |
|
| |||
| Router A Switch B | Switch B | Switch C | Switch C | Router D | |
| Out | In | Out | In | Out | In |
Interface | 0.10 | 3/0/1 | 3/0/2 | 0/1/1 | 0/0/1 | 0.12 |
VPI/VCI | 0/50 | 0/50 | 2/100 | 2/100 | 50/255 | 50/255 |
Configuring the ATM Switch Router
Take these steps:
Step Command
1Switch> enable Switch#
2Switch# configure terminal Switch(config)#
3Switch(config)# interface atm card/subcard/port[.subinterface ]
4
vci interface atm card/subcard/port[.vpt#] vpi vci
5
Purpose
Enter privileged EXEC mode.
Enter global configuration mode.
Select the interface to configure.
Configure the PVC. When configuring PVCs, configure the lowest available VPI and VCI numbers first.
Note VCIs 0 to 31 on all VPIs are reserved.
Return to privileged EXEC mode.