Cabletron Systems BRIM-WT1 manual Chapter Local Management, WAN Physical Configuration Screen

CHAPTER 3

LOCAL MANAGEMENT

This Chapter explains how to use the BRIM-WT1 local management screens. The WAN Physical Configuration screen and the WAN Interface Configuration screen appear as local management menu selections after you successfully install the BRIM-WT1 into the MicroMMAC. Refer to the MicroMMAC User’s Guide for instructions on how to setup and access local management.

3.1The WAN PHYSICAL CONFIGURATION SCREEN

To access the WAN Physical Configuration screen from the Feature Selection screen, use the arrow keys to highlight the WAN Physical Configuration option, then press the Return key. The WAN Physical Configuration screen shown in Figure 3-1 appears.

MicroMMAC/WT1 LOCAL MANAGEMENT

Cabletron MMW Revision xx.xx.xx

WAN PHYSICAL CONFIGURATION

Active WAN Port:	T1	T1 Timeslot View:						Active
Default WAN Port: T1		T1 Line Coding:						B8ZS
		T1 Frame Type:						ESF
		T1 Xmit Clk Src:							LOCAL TIMING
SYNC Port Type:	V.35	T1 Line Buildout:						0 db
Force CTS True:	Yes
Force DSR True:	No
			T1 Timeslot Configuration
	01-08
		00	00	00	00		00		00	00	00
	09-16	00	00	00	00		00		00	00	00
	17-24	00	00	00	00	00			00	00	00
SAVE	WAN INT CONFIG			RETURN
-F6-

Figure 3-1. WAN Physical Configuration Screen

BRIM-WT1 USER’S GUIDE Page 9