Cabletron Systems manual BRIM-WT1 USER’S Guide

Page 22

CHAPTER 3: LOCAL MANAGEMENT

3.The T1 Timeslot View field displays New and the cursor automatically moves into the Timeslot Configuration table.

4.Use the arrow keys to move to the desired Timeslots in the Timeslot Configuration table.

5.Type the desired Interface Number (03 to 26; or zero (00) for unused Timeslots).

Note: The MicroMMAC automatically assigns Interface 01 for Ethernet, and Interface 02 for the SYNC port.

6.Press the Return key.

7.Repeat steps 4 -6 to complete the configuration.

8.Use the arrow keys to highlight the SAVE command.

9.Press the Return key or press F6. The message “Save Done!” appears and the changes are saved to memory.

10.Use the arrow keys to highlight the T1 Timeslot View field.

11.Press the Return key until the Active selection appears. Verify that the desired changes have taken effect. The T1 configuration is complete.

Page 14

BRIM-WT1 USER’S GUIDE

Image 22
Contents Complete Networking Solution BRIM-WT1 USER’S GuidePage Page FCC Notice DOC NoticeCabletron SYSTEMS, INC Program License Agreement Cabletron Software Program LicenseExclusion of Warranty and Disclaimer Liability Contents Contents BRIM-WT1 USER’S Guide Using this Manual Chapter IntroductionGetting Help BRIM-WT1 FeaturesBRIM-WT1 Overview BRIM-WT1 Specifications Related Manuals Chapter Installation Unpacking the BRIM-WT1Installing the BRIM-WT1 Removing the Faceplate and Standoff ScrewsInstalling the BRIM-WT1 BRIM-WT1 USER’S Guide WAN Physical Configuration Screen Chapter Local ManagementActive WAN Port WAN Physical Configuration Screen Sample Timeslot Configuration Sample Configuration BRIM-WT1 USER’S Guide WAN Interface Configuration Screen PT# State Setting the Data Compression Field Setting the Line Coding Field BRIM-WT1 USER’S Guide Chapter Using the Lanview Leds BRIM-WT1 LedsT1/FT1 Port Leds Sync Port Leds BRIM-WT1 USER’S Guide