EMC DS-xxB2 dimensions Front Rails Screw Holes

Page 10

Installing the DS-xxB2 Rails

The front and rear flanges of the DS-xxB2 rails have three screw holes.

See Figures 8 and 9.

Front

Rails

Screw
Holes	EMC2069
	EMC2069

Figure 8 Front Flange of the DS-xxB2 Rails

Screw

Holes

Short

Rear

Rails

Long

Rear

Screw Holes

Rails	EMC2070

Figure 9 Rear Flange of the DS-xxB2 Rails

10

EMC Departmental Switch DS-xxB2 Into Third-Party Racks

Image 10

Contents Guide for Installation of Switches Into Third-Party Racks EMC Departmental Switch DS-xxB2Overview Device Device Model Mounting Kit ModelDevice Power Requirements Heat Dissipation Device Power, Cooling, and Weight InformationDevice Dimensions DeviceDevice Placement Requirements Front RearSwitch Mounting Kit DS16B2RKLS UseScrews, Nuts and Washers Component UseTools Required for Installation Tools RequiredInstalling the DS-xxB2 Rails Rear Door Removed for Clarity FrontDS-xxB2 Rails Installation DS-xxB2 Short Rear RailsFront Rails Screw Holes DS-xxB2 Rails Assembly Assembling the Rails Location of Keps NutsRound-Hole Channel Securing the Keps NutsInstalling Rails in Round-Hole Channels Square-Hole Channel Installing Rails in Square-Hole Channels Installing the DS-xxB2 Switch Mounting Bracket InstallationInstalling the Switch in the Rack/Cabinet Placing the Switch Into the Rack/CabinetM3 x 8-mm Pan Head Screw Tightening the Front and Rear Rail Assembly Screws Where to Get Help Sales and Customer Service ContactsEMC Departmental Switch DS-xxB2 Into Third-Party Racks