EMC DS-xxB2 dimensions Installing Rails in Round-Hole Channels

Page 14

Installing the DS-xxB2 Rails

 

Align the front rail

Rack

flange to the inside

Front

of the channel.

M5 x 10-mm Pan Head Screw

(8)

Front

Align the rear rail flange to the inside of the channel.

Rack

Rear

Rear

EMC2046S

Figure 13 Installing Rails in Round-Hole Channels

14

EMC Departmental Switch DS-xxB2 Into Third-Party Racks

Image 14
Contents Guide for Installation of Switches Into Third-Party Racks EMC Departmental Switch DS-xxB2Overview Device Device Model Mounting Kit ModelDevice Power Requirements Heat Dissipation Device Power, Cooling, and Weight InformationDevice Dimensions DeviceDevice Placement Requirements Front RearSwitch Mounting Kit DS16B2RKLS UseScrews, Nuts and Washers Component UseTools Required for Installation Tools RequiredInstalling the DS-xxB2 Rails Rear Door Removed for Clarity FrontDS-xxB2 Rails Installation DS-xxB2 Short Rear RailsFront Rails Screw Holes DS-xxB2 Rails Assembly Assembling the Rails Location of Keps NutsRound-Hole Channel Securing the Keps NutsInstalling Rails in Round-Hole Channels Square-Hole Channel Installing Rails in Square-Hole Channels Installing the DS-xxB2 Switch Mounting Bracket InstallationInstalling the Switch in the Rack/Cabinet Placing the Switch Into the Rack/CabinetM3 x 8-mm Pan Head Screw Tightening the Front and Rear Rail Assembly Screws Where to Get Help Sales and Customer Service ContactsEMC Departmental Switch DS-xxB2 Into Third-Party Racks