EMC DS-xxB2 dimensions Overview, Device Device Model Mounting Kit Model

Page 2

Overview

Overview

The Departmental Switch Models DS-16B2 and DS-32B2 are fibre channel gigabit switches that support link speeds up to 2 Gb/s. Each port can automatically negotiate to the highest common speed of all devices connected to the port. The ports are compatible with small form factor pluggable media (SFPs), are universal, self configuring, and are capable of individually becoming a fabric-enabled port (F_Port), fabric loop enabled port (FL_Port), or an expansion port (E_Port).

The Departmental Switch Model DS-16B2 is one rack unit in height, has an air-cooledchassis, and can be set up as a stand-alone unit or mounted in a 19-inch rack. The Departmental Switch Model DS-32B2 is an air-cooled 1.5U chassis; can be set up as a stand-alone unit or mounted in a standard Electronic Industries Association (EIA)

19-inch rack.

Table 1 lists the departmental switches and mounting kit model numbers.

Table 1 Departmental Switch and Mounting Kit Model Numbers.

Device

Device Model

Mounting Kit Model

 

 

 

16-port Departmental Switch

DS-16B2-00

DS16B2RKLS

 

 

 

32-port Departmental Switch

DS-32B2-00

DS16B2RKLS

 

 

 

Figure 1 shows an example of the DS-xxB2.

EMC2041

2

Figure 1 DS-xxB2

EMC Departmental Switch DS-xxB2 Into Third-Party Racks

Image 2 Contents
Guide for Installation of Switches Into Third-Party Racks EMC Departmental Switch DS-xxB2Overview Device Device Model Mounting Kit ModelDevice Power Requirements Heat Dissipation Device Power, Cooling, and Weight InformationDevice Dimensions DeviceDevice Placement Requirements Front RearSwitch Mounting Kit DS16B2RKLS UseScrews, Nuts and Washers Component UseTools Required for Installation Tools RequiredInstalling the DS-xxB2 Rails Rear Door Removed for Clarity FrontDS-xxB2 Rails Installation DS-xxB2 Short Rear RailsFront Rails Screw Holes DS-xxB2 Rails Assembly Assembling the Rails Location of Keps NutsRound-Hole Channel Securing the Keps NutsInstalling Rails in Round-Hole Channels Square-Hole Channel Installing Rails in Square-Hole Channels Installing the DS-xxB2 Switch Mounting Bracket InstallationInstalling the Switch in the Rack/Cabinet Placing the Switch Into the Rack/CabinetM3 x 8-mm Pan Head Screw Tightening the Front and Rear Rail Assembly Screws Where to Get Help Sales and Customer Service ContactsEMC Departmental Switch DS-xxB2 Into Third-Party Racks