EMC DS-xxB2 dimensions Installing Rails in Square-Hole Channels

Page 16

Installing the DS-xxB2 Rails

Rack	Align the front rail
Rack	flange to the inside
Front	of the channel.

M5 x 16-mm flat head screw (Qty. 8)

Rack

Rear

Align the rear rail flange to the inside of the channel.

Square-Hole Washer (Qty. 8)

EMC2047S

Figure 14 Installing Rails in Square-Hole Channels

16

EMC Departmental Switch DS-xxB2 Into Third-Party Racks

Image 16

Contents

Guide for Installation of Switches Into Third-Party Racks EMC Departmental Switch DS-xxB2Overview Device Device Model Mounting Kit ModelDevice Power, Cooling, and Weight Information Device DimensionsDevice Power Requirements Heat Dissipation DeviceDevice Placement Requirements Front RearSwitch Mounting Kit DS16B2RKLS UseScrews, Nuts and Washers Component UseTools Required for Installation Tools RequiredInstalling the DS-xxB2 Rails Rear Door Removed for Clarity FrontDS-xxB2 Rails Installation DS-xxB2 Short Rear RailsFront Rails Screw Holes DS-xxB2 Rails Assembly Assembling the Rails Location of Keps NutsRound-Hole Channel Securing the Keps NutsInstalling Rails in Round-Hole Channels Square-Hole Channel Installing Rails in Square-Hole Channels Installing the DS-xxB2 Switch Mounting Bracket InstallationInstalling the Switch in the Rack/Cabinet Placing the Switch Into the Rack/CabinetM3 x 8-mm Pan Head Screw Tightening the Front and Rear Rail Assembly Screws Where to Get Help Sales and Customer Service ContactsEMC Departmental Switch DS-xxB2 Into Third-Party Racks