EMC DS-xxB2 dimensions Switch Mounting Kit DS16B2RKLS, Use

Page 5

Switch Mounting Kit (DS16B2RKLS)

Switch Mounting Kit (DS16B2RKLS)

The switch mounting kit includes rails, and brackets as listed inTable 4.

Table 4		Switch Mounting Kit

	Component		Use

	2 switch mounting brackets (see Figure 15 on page 17)		2 per switch

	2 short rail assemblies (20.5 inches to 27 inches)		2 per switch

	2 long rail assemblies (27 inches to 34 inches)		2 per switch

Figure 3 illustrates these components.

Switch	Front
Mounting	Rails
Brackets

	Short	Long
	Rear	Rear
	Rails	Rails
		EMC2042S
Figure 3	Rails and Brackets

EMC Departmental Switch DS-xxB2 Into Third-Party Racks

5

Image 5

Contents EMC Departmental Switch DS-xxB2 Guide for Installation of Switches Into Third-Party RacksDevice Device Model Mounting Kit Model OverviewDevice Dimensions Device Power, Cooling, and Weight InformationDevice Power Requirements Heat Dissipation DeviceFront Rear Device Placement RequirementsUse Switch Mounting Kit DS16B2RKLSComponent Use Screws, Nuts and WashersTools Required Tools Required for InstallationRear Door Removed for Clarity Front Installing the DS-xxB2 RailsDS-xxB2 Short Rear Rails DS-xxB2 Rails InstallationFront Rails Screw Holes DS-xxB2 Rails Assembly Location of Keps Nuts Assembling the RailsSecuring the Keps Nuts Round-Hole ChannelInstalling Rails in Round-Hole Channels Square-Hole Channel Installing Rails in Square-Hole Channels Mounting Bracket Installation Installing the DS-xxB2 SwitchPlacing the Switch Into the Rack/Cabinet Installing the Switch in the Rack/CabinetM3 x 8-mm Pan Head Screw Tightening the Front and Rear Rail Assembly Screws Sales and Customer Service Contacts Where to Get HelpEMC Departmental Switch DS-xxB2 Into Third-Party Racks