EMC DS-xxB2 dimensions Device Placement Requirements, Front Rear

Page 4

Device Placement Requirements

Device Placement Requirements

There are no restrictions on the location of the DS-xxB2 switch in the rack/cabinet.

Switches are typically located at the top of the rack/cabinet.

Power distribution must support the number of outlets required for the switch and the switch power rating listed in Table 2 on page 3.

Front	Rear
	EMC2056S

Figure 2 Sample Cabinet Installation

4

EMC Departmental Switch DS-xxB2 Into Third-Party Racks

Image 4

Contents Guide for Installation of Switches Into Third-Party Racks EMC Departmental Switch DS-xxB2Overview Device Device Model Mounting Kit ModelDevice Power, Cooling, and Weight Information Device DimensionsDevice Power Requirements Heat Dissipation DeviceDevice Placement Requirements Front RearSwitch Mounting Kit DS16B2RKLS UseScrews, Nuts and Washers Component UseTools Required for Installation Tools RequiredInstalling the DS-xxB2 Rails Rear Door Removed for Clarity FrontDS-xxB2 Rails Installation DS-xxB2 Short Rear RailsFront Rails Screw Holes DS-xxB2 Rails Assembly Assembling the Rails Location of Keps NutsRound-Hole Channel Securing the Keps NutsInstalling Rails in Round-Hole Channels Square-Hole Channel Installing Rails in Square-Hole Channels Installing the DS-xxB2 Switch Mounting Bracket InstallationInstalling the Switch in the Rack/Cabinet Placing the Switch Into the Rack/CabinetM3 x 8-mm Pan Head Screw Tightening the Front and Rear Rail Assembly Screws Where to Get Help Sales and Customer Service ContactsEMC Departmental Switch DS-xxB2 Into Third-Party Racks