Extron electronic 50 manual Example 4 Viewing the current configuration

Page 28

Operation, cont’d

2.	Press and release the View button.
3.	Select video, audio, or both to view by pressing the Video and/or Audio
	buttons.
4.	Select the desired input or output(s) for which ties need to be viewed by
	pressing the input and output buttons.
		1.	To see all ties of the current configuration, press and release each input

			and output button, one at a time, with the Video and Audio LEDs on.

2.In view-only mode, you can view video and audio, video-only, or audio- only ties. Pressing and releasing the Video and Audio buttons toggles each on and off.

3.If, when you view video and audio ties, the Audio LED blinks and the Video LED is on after you select an input or output, the LEDs indicate that the audio ties are not the same as the video ties for that input (audio breakaway is active). Toggle the Video LED off by pressing and releasing the Video button.

4.When you enter view-only mode, the output LEDs turn on for all outputs without ties. Likewise, when an output button for which there are no ties is pushed, the output LEDs turn on for all outputs without ties. The blinking Audio LED indicates audio breakaway for one or more of those outputs.

Example 4: Viewing video and audio, audio only, and video only ties

See figure 3-7, figure 3-8, figure 3-9, and figure 3-10 and the following steps for an example of viewing the video and audio, audio-only, and video-only ties in the current configuration on a 12x8 Matrix 50 switcher with audio.

Example 4 shows the process of viewing the current configuration after the steps in Examples 1, 2, and 3 have been completed.

	LED key:			= off,		= on,						Press	Press
			F = flash once								Press		C
											Press		C
					INPUTS						B	VIDEO	AUDIO
					INPUTS
1	2	3	4	5	6	7	8	9	10	11	12

VIEW

CONTROL

I/O

1

2

3

4

5

6

OUTPUTS

7

8

ENTER PRESET VIEW ESC

VIDEO AUDIO

C	Press	F
	Press

2

5

6

7

A

ESC

Figure 3-7 — Example 4: Viewing the current configuration

APress and release the Esc button. The Esc LED flashes once.

BPress and release the View button to enter view-only mode. The View LED lights.

CTo select both video and audio for viewing, if necessary, press and release the Video and Audio buttons until the Video LED and Audio LED light. With no input LED selected, all output LEDs that have no established ties light.

3-8 Matrix 50 Series Switchers • Operation

Image 28

Contents Matrix Audio/Video Switchers Matrix 50 SeriesSafety Instructions English Consignes de Sécurité FrançaisSicherheitsanleitungen Deutsch Instrucciones de seguridad EspañolQuick Start Matrix 50 Series Switchers QS-1Quick Start Matrix 50 Series Switchers, cont’d Table of Contents Table of Contents, cont’d Matrix 50 Series Switchers Table of Contents Iii Iv Matrix 50 Series Switchers Table of Contents One Matrix 50 Series Switchers Introduction About the Matrix 50 Series SwitchersIntroductiontroduction, cont’d Features MatrixMatrix 50 switcher Introduction, cont’dMatrix 50 Series Switchers Introduction Introduction, cont’d Two Installationstallation, cont’d Rack Mounting the SwitcherMatrix 50 Series Switchers Installation Cabling and Rear Panel ViewsVideo input and output connections video models only Power connectionAudio input and output connections audio models only Installation, cont’d RS-232/422 connectionExternal sync connection Simple external sync connection exampleAdditional rear panel views Multiple device external sync connection exampleThree Front Panel Controls and Indicators Operationeration, cont’dDefinitions Input buttons, output buttons, and LEDsControls Power Creating a configurationOperation, cont’d Front Panel OperationsExample 1 Creating a set of video and audio ties Example 1 Creating a tieExample 2 Adding a tie to a set of video and audio ties Example 3 Removing a tie from a set of video and audio tiesViewing a configuration Example 3 Selecting audio and selecting inputExample 4 Viewing the current configuration Example 4e Viewing the current configuration, audio only Muting and unmuting video and/or audio Example 5 Muting and unmuting an outputUsing global memory presets 11 Example 5, step d Muting and unmuting outputsExample 6 Saving a preset Example 7 Recalling a presetViewing and adjusting the audio level Example 8 Viewing and adjusting an audio levelExecutive mode front panel security lockout 14 Example 8 Viewing the audio levelTroubleshooting System reset to factory defaultsPlasma display S-video problem WorksheetsWorksheet example 1 System equipment 16 Worksheet example 1 System equipmentWorksheet example 2 Daily configuration 17 Worksheet example 2 Daily configurationWorksheet example 3 Test configuration 18 Worksheet example 3 Test configurationConfiguration worksheet Operation, cont’d Four Host-to-Switcher Instructions Switcher-Initiated MessagesMatrix 50 Series Switchers Programmer’s Guide Programmer’ser’sGuide,Guidecont’dSwitcher Error Responses Using the Command/Response TableCommand Ascii Command Response Additional description Command/Response TableProgrammer’s Guide, cont’d Command/response table for SIS commands Cont’d View ties, gain, and presets Five Matrix Switcher+ Control Program Installing the softwareUsing the software MatrixSoftware,cont’dExtron Matrix Switcher+ Control Program window blank Windows buttonsMatrix Software, cont’d Windows menusUsing the help system Using emulation modeButton-Label Generator Extron’s Button-Label Generator window AAppendix a Specificationsecifications, cont’d Matrix 50 Series Switchers SpecificationsAudio input Specifications, cont’d Matrix 50 Series switchers part numbersPart Numbers Matrix 50 Option KitsOptional Accessories CablesExtron Part BNC-4 Mini HR Cable Pre-cut cablesVideo Cable AppendixBB Hardware Procedures Opening the switcherMatrix 50 Series Switchers Reference Information ReferenceInformation,co t’dClosing the switcher Figure B-2 Side view, Matrix 50 S-video and audio switcherInstalling a video module Reference Information, cont’dRemoving a video module Installing an audio module Removing a video module on page B-5On page B-3 Removing an audio moduleSwapping the serial ports Installing a firmware update Figure B-8 Key and pin 1 markSetting the front panel jumper Replacing the AC fuseMatrix 50 Series Switchers Reference Information B-11 Button LabelsBlank Matrix 50 Series Switchers Reference Information B-13 Figure B-10 Button label blanks, 12-button stripReference Information, cont’d FCC Class a Notice Extron’s Warranty Extron Electronics, USA