Manual
Page 5 / 33- Revision 01
ARE I2 / RS 232 – Installation Guide
1 Introduction
This document will describe the components of the Compact Reader System ARE I2 / RS 232 and the procedure how to do the first set up of the reader.
The main features of the reader are listed below:
•the antenna is placed inside of the housing (base version)
•there are algorithm available to read nearly all 125
•the serial RS
•the allowed supply voltage is 9 to 30VDC
• low power consumption of reader < 1.2 Watt
•high reliability for reading and writing within an industrial environment.
•compact housing of the reader with multiple ways for mounting.
•the cabling concept of the reader is optimised to service demands.
•the protection class of the housing is IP65
•there is a set of external antennas available to meet special application demands (
2 System Overview
In the base version all electronic components of the reader is placed inside of a small plastic housing.
Transponder
24VDC
Reader with
Integrated Antenna
ARE I2
Figure 2-1: Concept of the Reading System
AEG
Identifikationssysteme GmbH
Söflinger Straße 100
Tel.