Test-Um NT955 operating instructions Tone Generator

Test-Um NT955 Series ValidatorTM Running Manual Tests

Placing Tone On a Cable Pair

1.Select Manual Tests. Choose Data, Phone or 2-wire cable type.

2.The Manual Test Menu for the cable type you selected displays.

3.Select Tone.

4.Select the desired Tone Sound. Press Accept. The cursor moves to the Tone Path dialog box. (Figure 5.6)

5.Select the Tone Path by choosing the cable pair or pairs you wish to apply Tone to. Press Accept.

6.Using the appropriate cable assembly, connect the cable to the Main unit jacks.

7.Press the Send (F1) soft key to start the tone.

8.Using a Tone Tracer, such as Test-Um’s TT100, trace the tone.

Data Tone Untitled1.job

	2005 Aug 25 Test-Um Inc.
100%	10:53:01	VALIDATOR

Tone Sound:

High - Low

Tone Path:

all

Press send to begin.

SEND

Figure 5.6 Tone Generator

70