ValidatorTM Network Tests |
6. Performing Active Network Tests
Active Network Tests include four functional test areas designed to report cable performance and verify connectivity to network devices: Port
Discovery, Ping, Cisco Discovery Protocol, and Hub Flash. Select Network Tests from the Start menu to access Network Tests. Use the RJ45 ports to perform these tests.
Warning! Active Network Test Results will NOT be Saved.
Start |
|
Untitled1.job | 100% |
2005 Aug 25
10:53:01 VALIDATOR 
Auto |
Test |
Job |
Manager |
Manual |
Tests |
Setup |
Network |
Tests |
Properties |
Network Tests
Untitled1.job 100%
2005 Aug 25
10:53:01 VALIDATOR 
Port | Ping Test |
Discovery |
|
Cisco
Discovery
Protocol
Hub
Flash
Port Discovery
Untitled1.job 100%
2005 Aug 25
10:53:01 VALIDATOR 
Ethernet |
|
Capabilities | |
| AUTO |
Link established at: 1 Gbs
Remote device
Remote device advertises: 1 Gbs FDX
Remote device advertises: 100 Mbs HDX/FDX
Remote device advertises: 10 Mbs HDX/FDX
Pair [A]: | skew: 0.0 ns | SNR: 30.0 dB |
Pair [B]: | skew: 8.0 ns | SNR: 29.9 dB |
Pair [C]: | skew: 0.0 ns | SNR: 30.0 dB |
Pair [D]: | skew: 8.0 ns | SNR: 30.0 dB |
Frequency Offset: 30 ppm
Figure 6.1 Port Discovery Network Test Flowchart
74