Test-Um NT955 operating instructions Ping Test, Gw/Rtr Dns

Test-Um NT955 Series ValidatorTM Network Tests

6.2. Ping Test

The Ping Test is used to verify connectivity to resources on or off the network and IP addresses. The Ping Test will simultaneously Ping up to seven different IP addresses and can be run in DHCP or manual addressing modes.

In DHCP mode, the Validator-NT’s assigned address and the addresses of the router/gateway and DNS server plus the net mask are obtained automatically from a DHCP server and the values displayed on the Validator-NT. Press Get IP Parameters to start the DHCP request process.

IP Address

Untitled1.job 100%

2005 Aug 25 Test-Um Inc.

10:53:01 VALIDATOR

For manual IP address, uncheck DHCP. Netmask is count of 1 bits

	DHCP
My IP	192.168.1.200 / 24
GW/RTR
DNS

My IP: 192.168.1.109

Netmask (CIDR): 255.255.255.0 (24)

Gateway/Router (GW/RTR): 192.168.1.1

Domain Name Server (DNS): 192.168.1.100

Get IP

Parameters

BACKSPC DELETE PINGTOOL TARGETS

Figure 6.8 DHCP Mode Ping Test Results

79