Test-Um NT955 operating instructions Creating Template Information

Test-Um NT955 Series ValidatorTM Managing Job Files

3.3. Creating Template Information

The purpose of the Template file (*.tut file) is to avoid reentering Company Information and/or Custom Cable Definitions for each job by saving the information in a Template that can be used on multiple jobs. You can also use an existing Job to create a Template.

Test-Um recommends creating one or more reusable Template files (*.tut files) when you perform the initial setup on your Validator-NT. Each time you create a New Job select the template that you created and make changes to the information as necessary.

The most efficient way to create templates is by using the Plan-Um software. See the section of the Plan-Um instruction booklet titled Managing Job Files/Save and Export As Template for complete instructions. Template files can be created and stored in Plan-Um and uploaded to the Validator-NT as needed, or created directly in the Validator-NT.

1.To enter Template Information using the Validator-NT keypad, select Auto Test on the Start screen. Enter the Contractor and/or Custom Cable Information that you wish to save as a template. Press Quit to return to the Auto Test screen.

2.Select Job Utilities and navigate to the Export Tut button.

3.Use the alphanumeric keypad to name the Template. Use the Backspace (F1) and Delete (F2) soft keys to edit the name as required. Press Accept to complete the name. Press OK (F3) soft key to save the template information under the name entered.

Export			2005 Aug 25	Test-Um Inc.
Untitled1.job		100%	10:53:01	VALIDATOR
	Current File:		Untitled1.job
	New Template:

BACKSPC DELETE OK

Figure 3.5 Exporting to a Template

4.The Template Information that you created contains contractor and/or custom cable information associated with the current job.

You can use this template as it is or edit the information when loaded into other jobs. You can also use an existing Job to create a Template.

48