Test-Um NT955 operating instructions Backspcclear Start Stop

Test-Um NT955 Series

4.To clear the current broadcast, press the Clear soft key (F1). The screen goes blank.

CDP Display Screen Untitled1.job

100%

2006 Jul 05 Test-Um Inc.

10:53:01 VALIDATOR

Reading CDP packets from network.

BACKSPCCLEAR START STOP

6.16Selecting Clear for CDP Display Screen

5.To start a new broadcast, press the Start soft key (F2). The message “Reading CDP packets from network” appears on your screen below the CDP message.

6.To stop the current broadcast, press the Stop soft key (F3). A message “Ignoring CDP packets from network” appears on the screen below the CDP message.

CDP Display Screen Untitled1.job

100%

2006 Jul 05 Test-Um Inc.

10:53:01 VALIDATOR

Port (Our Port): eth0

Device-ID: cisco_3524

Device addresses:

IP address: 192.168.1.252

Holdtime: 179 sec

Capabilities: Transparent_Bridge Switch

Version:

Cisco Internetwork Operating System Software

IOS ™ C3500XL Software (C3500XL-C3H2S-M),

Version 12.05(5)XU, RELEASE SOFTWARE (fc1)

Copyright (c) 1986-3000 by cisco Systems Inc.

Ignoring CDP packets from network.

BACKSPCCLEAR START SAVE TYPE

6.17 Selecting Stop for CDP Display Screen

86