Other UPS Features Rear Panel | Tripp Lite 1400VA manual

Basic Operation continued

Other UPS Features (Rear Panel)

15 amp/120V

NEMA 5-15R

20 amp/120V

NEMA 5-20R

AC Receptacles: Your UPS features 15-amp AC outlets, and select models also feature 20-amp and 30- amp AC outlets. These output receptacles provide your connected equipment with AC line power during normal operation and battery power during blackouts and brownouts. The UPS protects equipment connected to these receptacles against damaging surges and line noise. If you have a seri- al or USB connection to your UPS, you can remotely reboot connected equipment by turning the receptacles OFF and ON using Tripp Lite's PowerAlert Software. Select models have their receptacles divided into one or more load banks (labelled “LOAD 1,” etc.) which maybe be remotely switched OFF and ON using Tripp Lite UPS software without interrupting power to equipment connected to the other outlets. Select models also feature outlets labelled “UNSWITCHED”, which may not be remotely switched off. See software instructions for details.

30amp/120V NEMA L5-30R

20amp/120V NEMA L5-20R

Smart Serial Port(s): Your UPS features 1 or more serial ports that may be used to connect the UPS to a serial port on any workstation or server. Use with Tripp Lite cabling and PowerAlert Software to monitor and manage network power and automatically save open files and shut down equipment during a blackout. See Connection section.

Smart USB Port(s): Your UPS features 1 or more USB ports that may be used to connect the UPS to a USB port on any workstation or server. Use with Tripp Lite cabling and PowerAlert Software to monitor and manage network power and automatically save open files and shut down equipment during a blackout. See Connection.

EPO (Emergency Power Off) Port: Your UPS features a EPO port that may be used to connect the UPS to a contact closure switch to enable emergency inverter shutdown. See Connection.

Accessory Slot: Remove the small cover panel from this slot to install optional accessories to remotely monitor and control your UPS. Refer to your accessory’s manual for installation instructions. Contact Tripp Lite Customer Support at

(773)869-1234 for more information, including a list of available SNMP, network management and connectivity products.