Tripp Lite SMART3000SLT, SMART2200SLT owner manual Storage, Service

Page 9

Storage and Service

Storage

Before storing your UPS, turn it completely OFF: with the UPS ON and receiving utility power, press and hold the “ON/OFF/STANDBY” button for one second (an alarm will beep once briefly after the interval has passed); then, unplug the UPS from the wall outlet. If you store your UPS for an extend- ed period of time, recharge the UPS batteries once every three months: plug the UPS into a wall out- let; allow it to charge for 12 hours; and then unplug it and place it back in storage. Note: after you plug the UPS in, it will automatically begin charging its batteries; however, it will not supply power to its outlets (see Quick Installation section). If you leave your UPS batteries discharged for an extended period of time, they will suffer a permanent loss of capacity.

Service

Before returning your UPS for service, follow these steps:

1.Review the installation and operation instructions in this manual to ensure that the service problem does not originate from a misreading of the instructions. Also, check that the UPS System's circuit breaker(s) are not tripped. This is the most common cause of service inquiries which can be easily remedied by following the resetting instructions in this manual.

2.If the problem continues, do not contact or return the UPS to the dealer. Instead, call Tripp Lite at (773) 869-1233. A service technician will ask for the UPS's model number, serial number and purchase date and will attempt to correct the problem over the phone.

3.If the problem requires service, the technician will issue you a Returned Material Authorization (RMA) number, which is required for service. If you require packaging, the technician can arrange to send you proper packaging. Securely pack the UPS to avoid damage during shipping. Do not use Styrofoam beads for packaging. Any damages (direct, indirect, special, incidental or consequential) to the UPS incurred during shipment to Tripp Lite or an authorized Tripp Lite service center is not covered under warranty. UPS Systems shipped to Tripp Lite or an authorized Tripp Lite service center must have transportation charges prepaid. Mark the RMA number on the outside of the package. If the UPS System is within the 2-year warranty period, enclose a copy of your sales receipt. Return the UPS for service using an insured carrier to the address given to you by the Tripp Lite service technician.

Warranty Registration

Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You'll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

9

Image 9
Contents Intelligent, Line-Interactive UPS Systems SmartPro SLTBattery Warnings Important Safety InstructionsUPS Location Warnings UPS Connection WarningsPlug the UPS into an outlet on a Dedicated circuit Plug your equipment into the UPSTurn the UPS on USB and RS-232 Serial Communications Buttons Front Panel Indicator Lights Front Panel Other UPS Features Rear Panel Basic Operation Storage ServiceRemove old batteries Carefully pull the front panel away from the UPSConnect new batteries Reassemble UPSInteligentes e interactivos con la línea Manual del propietarioAdvertencias sobre la ubicación del UPS Instrucciones de seguridad importantesAdvertencias sobre la conexión del UPS Advertencias sobre la conexión de equiposConecte el UPS en una salida de un circuito dedicado Conecte sus equipos en el UPSEncienda el UPS Conexión de puerto EPO Comunicaciones USB y serie RS-232Botón ON/OFF/STANDBY Encendido/Apagado/Reserva Botones Panel frontalLuces indicadoras Panel frontal Operación básica continúaOtras funciones del UPS Panel posterior Operación básica continúa Almacenamiento ServicioConecte las nuevas baterías Quite las baterías viejasManuel du propriétaire Directives de sécurité importantes Mises en garde Emplacement de lUPSMises en garde Connexions de lUPS Mises en garde Connexion déquipementBrancher lUPS dans une prise dun Circuit dédié Connecter votre équipement à lUPSMettre lUPS sous tension Connexion au port EPO Ports de communication de série USB Et RS-232Boutons Panneau avant Voyants indicateurs Panneau avant Fonctionnement de base, suiteAutres caractéristiques de lUPS panneau arrière Fonctionnement de base, suite Entreposage ServiceEnlever les anciennes piles Connecter de nouvelles pilesRéassemblez lUPS Page 200607046