Tripp Lite B040-008-19, B040-016-19 owner manual External Views, Front View, Rear View, Keyboard

1.Features (continued)

1.5External Views

Front View

1

2

3

4

5

6 Figure 1-1: NetController KVM Front Panel

7

9

10

8

1Upper Handle: Pull to slide the KVM Switch out; push to slide the KVM Switch in.

219” LCD Display: Built-in on-screen display (OSD) for convenient KVM Switch control, including port selection.

3OSD Push Buttons: Used to access the OSD Menu to adjust the LCD display.

4LED Indicators: The red LEDs will illuminate above each port with a connected computer that is running power through the console interface. If the connected computer is powered off, the red LED will not be illuminated. The green LEDs will illuminate above the computer port that is currently selected as active.

5Port Selection Buttons: Push to directly select the active computer channel that can be controlled by the shared keyboard, touch pad and LCD display

6Keyboard

72-Button Touch Pad: Left button is left click, right is right click. Run your finger up or down the far right side of the touch pad to scroll up and down a screen.

8Slide Release: Mechanism to lock the drawer closed when the console is not in use. Prevents it from accidentally sliding open. To slide the console out, you must first release it by moving the tab sideways.

9Rackmounting Brackets: There are rackmount brackets to secure the chassis to a system rack located at each corner of the unit.

10Railway Release Tabs: When the drawer is completely pulled out to the end, the railway system will lock. Push the release tabs on both sides to release the drawer so that it can be pushed back in.

Rear View

2 4 1 3

5

2 4 1

FIRMWARE UPGRADE 100-240V AC 50/60Hz

DAISY-CHAIN OUT

5

Figure 1-2: B040-008-19 Rear Panel

3

					NetController™ 16-PORT CONSOLE KVM SWITCH		MODEL: B040-016-19
16	15	14	13	12	11	10	9
8	7	6	5	4	3	2	1

Figure 1-3: B040-016-19 Rear Panel

1Power Dongle: The power dongle should receive electricity from the included AC power cord.

2USB Port: The USB port is available if you want to use a separate keyboard or mouse.

3PC Ports: The PC port is a HD15 (F) connector integrated with USB and PS/2 keyboard, mouse and video. To connect a computer to the PC port, you will need one of Tripp Lite’s P780-Series USB PS/2 KVM Cable Kits. Not included.

4Firmware Upgrade Port: This port is used during the firmware upgrade process (see 3.3.9 Upgrade Firmware on pg. 11).

5Daisy-Chain OUT Port: The daisy-chain OUT port is a HD15 (F) connector which provides daisy-chaining downstream to a B042-Series KVM Switch.

3