Sun Microsystems 1290 manual 20Upper and Lower Pivot Bracket Mounting Holes

1.Remove the hinge pin securing the pivot bracket to the upper CMA arm, which facilitates attaching the bracket to the server chassis.

2.Secure the pivot bracket to the upper left-hand side of the server chassis using the two captive screws. See FIGURE 1-20and FIGURE 1-21.

Upper pivot bracket mounting holes

Upper pivot bracket

Lower pivot bracket

Lower pivot bracket mounting holes (hidden)

FIGURE 1-20Upper and Lower Pivot Bracket Mounting Holes

After attaching the pivot bracket to the chassis, use the hinge pin removed previously to secure it to the upper CMA arm.

Chapter 1 Unpacking and Installing the Server 27