Sun Microsystems 1290 manual Slide the server into the system cabinet

FIGURE 1-15Inserting and Tightening the Spacers

5.Slide the server into the system cabinet.

6.From the rear of the server, insert and tighten the lock nuts, one for each rail (FIGURE 1-16).

FIGURE 1-16Inserting and Tightening the Lock Nut

7.Repeat Step 1 through Step 6 for each server in the system cabinet.

8.Retract the cabinet stabilization mechanism (as required).

Chapter 1 Unpacking and Installing the Server 23